yeah- whatever is needed- in the pic you can see the end is a tighter scroll/bend so I used a jig like yours- 'ceptin I welded 2 small pieces of Pipe on to a piece of angle and worked the scroll shape in it.
Needed a gradual bend so I experimented with the 4" Pipe.
The Mrs. made this little Firepit and the scrolled feet were bent this way.
Results 1 to 10 of 16
Thread: Quick Square Bar Bender
03-31-2010, 07:45 PM #11Ed Conley
Passport Plus w/Spool Gun
Miller 125c Plasma 120v
SO 2020 Bender
You can call me Bacchus