Spoolmatic 30A Ext Cable Pinout

[jhara]

I thought I have seen this before on here but I can't find it. I want to build an extension cable for my 30A spool gun. All I need is the pinout for the 14 pin connectors. Does anyone know which pins I need? I have the amphenol part numbers so I need to know is how many conductors my cable needs to be, what size would help and the connector pinout. Thanks

[H80N]

Jhara
pinout is on page 28 of the PDF manual... 23 of the paper one
here is the link

http://www.millerwelds.com/om/o1213ae_mil.pdf

hope this helps
Heiti

[Desertrider33]

Your Spoolmatic extension cable will use a 10-pin connector, not a 14-pin. The 14-pin is for the WC24 controller to connect to the power source, if connecting the Spoolmatic to a power source with 24vac output but no 24vdc output (such as a Trailblazer or XMT).