new member, couple of projects.

[cam]

g'day all,
havee been a reader on this site for quite a while, but have only just signed up. bit of background, im 20 years old, living in sunny queensland, australia, working as a boilermaker. mainly do chassis for transportable buildings/houses. but occasionally get to make some creations of my own.
first one is a press i made yesterday, and a little brake i made today, both not completely finished in the photos, lacking some springs and other bits and pieces.
bender successfully bends 75x8 plate (3inchx5/16) and 25x12 (1 x 1/2)
half inch rod etc. with 10tonne jack.
also attatched is a couple of photos of the auger stand for our 3tonne excavator.

cam