I picked up a roll around cart that was being scrapped at work thinking I would make a brazing table out of it.
My idea was to build an edge around the top and put firebrick inside for the surface.
Well firebrick has turned out to be hard to locate. With several uncles that make a living laying brick, I thought this would be easy to find. It seems that they use a metal fire box now days for fireplaces.
What surface would you use for this project?
Results 1 to 5 of 5
Thread: Brazing Surface
03-07-2010, 07:51 AM #1
03-07-2010, 09:13 AM #2Member
- Join Date
- Nov 2009
- Ontario Canada
Quick google search turned up this company that sells fire brick
I'm sure if you talked to a store that sells fireplaces and wood stoves they would also have a source of these firebrick as i'm sure there are a lot of older stoves that need them replaced occasionallyHarold Mulder
Millermatic 211 MVP
HTP Invertig 201 with water cooler
03-07-2010, 10:29 AM #3Senior Member
- Join Date
- Oct 2007
Check out www.marvelmasonry.com
Dave"Bonne journe'e mes amis"
03-07-2010, 01:04 PM #4
orscheln or tractor supply farm stores usually have them.
Miller Trailblazer 302
Smith Torch Outfit
Lots of Grinders
Miller Elite Autodark Hood
O'l Trusty Jackson
03-07-2010, 02:22 PM #5
Your right. Tractor Supply has them. Thanks guys
I might get to do this project after all.