A couple years ago, I had a job offer to make several thousand various size brackets for a fellow & a lot of future work. I did some web searching & found this Handi-Bend on one of the shop sites. You can see the price as it was then. Their unit could handle up to 10"W material. I didn't need anything that large, so I designed & fabbed mine to take up to 4" W material. I got into the residual cutoff pieces box & started digging for the material I needed. Yup....found it all. This project needs a lathe & mill, so if you don't have one, you'll have to find someone to trade some services for. The only parts I bought were the return springs. I have a couple projects I will post to show how useful this unit is & the ease to bend up to 1/4". Here's some pics.
Results 1 to 4 of 4
Thread: PROJECT: Saving Some Money...
02-13-2010, 05:41 PM #1
PROJECT: Saving Some Money...