Anybody ever built their own radiator? Thought I'd replace a brass/copper one with aluminum and thought it would be a cool project (no pun intended). I'm having a problem finding the tubes and cooling fins, but all kinds of other custom parts are available.
Results 1 to 8 of 8
02-02-2010, 07:46 PM #1
RadiatorMiller Syncrowave 200
Homemade Water Cooler
60 year old Logan Lathe
Select Machine and Tool Mill
More stuff than I can keep track of..
02-02-2010, 08:07 PM #2
I watched my buddy build them for years. He had a rad shop for his business...BobBob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
Spool Gun conversion. How To Do It. Below.
02-02-2010, 08:15 PM #3
02-03-2010, 08:28 AM #4Senior Member
- Join Date
- May 2009
- Central North Carolina
A radiator for what?
I was going to try to make one out of brass and copper for my DIY TIG cooler, but found an aluminum transmission cooler that worked great and it only cost about $30. I can't justify making anything for that. I also considered using an auto heater core but couldn't find the right configuration. Many of them were also in that price range.
Miller Bobcat 225NT
Miller DialArc HF & DIY Cooler
2 Miller Digital Elite and 3 Fixed Shade Helmets
2 O/A torch sets
DeWalt 18 volt 1/2" Driver/Drill
DeWalt 18 volt 6 1/2" Metal Saw
DeWalt Porta Band & SWAG Offroad V3 Table
Milwaukee 8" Dry Cut Saw
Milwaukee 14" Dry Cut Chop Saw / Delta Stand
Milwaukee 9" Grinder
2 Milwaukee 4 1/2" Grinders
Milwaukee Hole Hawg 1/2" Drill
Wallace 5 Ton Gantry
Too many hand tools
02-03-2010, 06:04 PM #5
02-03-2010, 08:13 PM #6Senior Member
- Join Date
- Oct 2007
- Cave Creek Az
Go down to Bills radiator service. He actually has the equipment to build cores as well as the tanks etc. It is on McDowell and about 35th Ave ( been a while since I've been there though.
02-03-2010, 09:13 PM #7
02-04-2010, 07:00 PM #8Senior Member
- Join Date
- Oct 2006
- DFW area
I wonder if ya couldn't use the tubes/cooling fins/core from a automotive A/C condensor.
Or, I've seen a few Alum. coils from a outside type A/C unit in the scrap yard.
That'd leave you only having to build the top & bottom or two side tank pieces.
."Gone are the days of wooden ships, and Iron men.
I doubt we'll see either of their likes again".
Unknown US Coast Guard unit Commander.