I am using the studs instead of bolts, to mount the 1//4 x 4 in flat bar on top of the forks on a walkie stacker rated at 1500 lbs, to extend them 4 inches, in order to lift a 700 lb ATV onto pallet racks that are 48 inches high.
The forks now reach all but about 3 inches across the bottom frame of the ATV and lift it alright but I want it to go all of the way across the frame.
The extended 4 inches just makes me feel better about it.
A material handling company suggested that it should be OK, since I'm lifting less than 1/2 of the load limit and I'm keeping the load close to the mast.
Results 21 to 21 of 21
Thread: Wheel Studs
02-02-2010, 11:56 AM #21Senior Member
Millermatic 211 AutoSet w/MVP
- Join Date
- Oct 2008
Century 110 volt 90/110 MIG-Gone to my son, in Texas
Victor SuperRange OA
Milwaukee Cold Cut Saw
Milwaukee Portable Deep Cut Bandsaw
Milwaukee Hole Hawg
Jet Horizontal/Vertical Bandsaw
Jet MD-18 Mill Drill
Orbit Drill Press
12 Ton Floor Press
2002 E-350 V-10:
1983 F-150 4.9L 6
2004 Honda ST1300
2007 Suzuki LTA400F Quad
1997 Suzuki DR650