pictures of homemade welding carts

[Childress14]

[QUOTE=Johnp256;289446]Jeez, I guess I didn't think to much of it when I made up a little cart for my little mm 180 from some scraps I had, I think the only thing I bought were the two front casters. I just wanted a little mobility, since my big Syncro has always been stationary. But I really like some of the more elaborate carts on here with drawers and bins for supplies and accessories.







Attachment 29949Attachment 29950Attachment 29951Great job for only using scrap. Sometimes designing is more difficult with limited supplies, but you pulled it off. Also, simpler is usually better and it looks like you still have room underneath the machine, on the lower lever, for some expanded metal which, in turn, will make a small shelf for storage or whatever will fit. Sean Childress

[bristyle]

.20120717_171801.jpg20120717_171727.jpg20120717_171843.jpg20120717_171938.jpg20120717_172026.jpgthis is a cart i just finshed it only took 4 days lol it has a hobart 140 and 230 ironman mig and powermax 45 plasma..25 ft airhose reel 30 ft 110 volt cord reel..2 bottles argon and mix gas and 4 way valve to select which gas i want

[lyndoman]

I made this cart out of Aluminum Extrusions that I saved from a scrap hopper at work. I used some mower wheels, casters and a 1/2" solid axle that I had on other things so I guess you could say it is %100 recycled. It took some engineering on my part to get the strength I needed due to the extrusions having one open side but it is very strong. It can take a T size cylinder or two S cylinders no problem.

200dxcart2.JPG200dxcart1.JPG200dxcart.JPG

[JeepMan]

Well I am almost done with my new cart. Need to build or buy some filler rod canisters. Anyone have any ideas. Thanks

[JeepMan]

2012-07-10_18-00-08_907.jpg

Well I am almost done with my new cart. Need to build or buy some filler rod canisters. Anyone have any ideas. Thanks

[JeepMan]

Does anyone know if Rod Guard has a direct website. Also do the 36" canisters come in any other color than blue. Blue is all I can find. Thanks, Michael

[Doughboyracer]

Does anyone know if Rod Guard has a direct website. Also do the 36" canisters come in any other color than blue. Blue is all I can find. Thanks, Michael

THIS says they come in red too...LE-300-12

[JeepMan]

Well I finally got around to mounting my power cord and rod guards.

[wrench3047]

Well I finally got around to mounting my power cord and rod guards.

The clamps holding the rod canisters, are fabbed or purchased?

[JeepMan]

The clamps holding the rod canisters, are fabbed or purchased?

The clamps came from Home Depot. They are in the electrical department. You will have to modifly the clamps. They are to big so you will have to cut them. They are only 98 cents.