Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 10 of 10

Hybrid View

  1. #1
    Join Date
    Jan 2010
    Location
    Davis, California
    Posts
    3

    Question How Much is a AEAD 200 LE worth?

    Hi,

    I am thinking of buying a unit that doesn't work. It is a total "?" because the owner is not mechanically or electrically inclined. How much is the unit worth? What would it be worth if I got it to work? And what should I look for that will tell me the unit is toast? Here is the ad: http://sfbay.craigslist.org/eby/tls/1543761322.html. Your advice, and opinion is greatly values, and appreciated. Thanks.
    Last edited by cityfrontsailor; 01-12-2010 at 01:55 AM.

  2. #2
    Join Date
    Dec 2008
    Location
    Arizona
    Posts
    812

    Default

    I think you need to define "Doesn't Work". Does the engine not run? Does it run and not weld? If it runs and doesn't weld, does the generator work? I'm guessing that that machine is at least 20-25 years old, and if it doesn't work it's worth whatever a scrap dealer will give you for it?
    Miller Syncrowave 200
    Homemade Water Cooler
    130XP MIG
    Spectrum 375
    60 year old Logan Lathe
    Select Machine and Tool Mill
    More stuff than I can keep track of..

  3. #3
    Join Date
    Jan 2010
    Location
    Davis, California
    Posts
    3

    Default

    I am not sure what the deal is. The seller is not very mechanically inclined and could not fix it himself. Lets say best case the motor will not run. (I will update later as more info comes in) I am planning on looking at the unit this Thursday 1/14/10. What should I look for if I can't get the motor started? What is a reasonable offer for not knowing what the issue is? I am looking to fix the motor and resell it. Thanks.

  4. #4
    Join Date
    Dec 2009
    Location
    Midwest
    Posts
    581

    Default

    Quote Originally Posted by cityfrontsailor View Post
    I am not sure what the deal is. The seller is not very mechanically inclined and could not fix it himself. Lets say best case the motor will not run. (I will update later as more info comes in) I am planning on looking at the unit this Thursday 1/14/10. What should I look for if I can't get the motor started? What is a reasonable offer for not knowing what the issue is? I am looking to fix the motor and resell it. Thanks.
    For what they want for it, you're wasting your time. That machine has a ceiling of about $1200 used AS IS & if you run into anything more than a simple fix, by the time you funnel your labor & whatever parts into it you have to, you'll at best come out of it breaking even.

    Offer $100-150 MAX (that's if the engine runs) & walk if he doesn't take it. The engine is worth a little more than that, so at least it wouldn't be a total loss. It would be different if you knew exactly what was wrong & had the parts on hand to repair it.

    IMHO, of course.
    So you're telling me...You're not nostalgic? Then, give me another word for it......

  5. #5
    Join Date
    Dec 2008
    Location
    Arizona
    Posts
    812

    Default

    I believe it probably has an Onan gas engine, parts are available for it. As far as the rest of it, it's a crap shoot as to what could be wrong.
    Miller Syncrowave 200
    Homemade Water Cooler
    130XP MIG
    Spectrum 375
    60 year old Logan Lathe
    Select Machine and Tool Mill
    More stuff than I can keep track of..

  6. #6
    Join Date
    Jan 2008
    Location
    northern california
    Posts
    328

    Default Onan parts can add up quick

    Even on a 15 year-old Onan the parts get to be expensive, partly due to company changes. If the machine is 25 years old you could have a very hard time finding new valves or seals. If you can find them, you will pay heavy mark-up.
    Ornamental fabrication shop worker
    at home...
    2011 Hobart Handler 210MVP
    2013 spoolrunner 100 spool gun

  7. #7
    Join Date
    Jan 2009
    Posts
    4

    Default Aead 200 le

    I have an old AEAD 200 LE and was offered $1500 for it, BUT it is in great shape and not used much. It's biggest issues are it sat unused for 10 years or so and had what appeared to be numerous problems. Well, a carburator cleaning and filing the points got is started and it runs good. One cylinder smokes a little but it does not burn any oil , so obviously not too bad of rings. The only thing that did not work was the battery charger. The voltage regulator was bad and I picked up an old auto voltage regulator from auto zone and it now charges with 14.5 volt output and controls battery at 12.8 volts. My thinking is these are tough old machines and if you can make it work, it will be a good machine, but as far as value-- I would guess that $1250-$1500 is the VERY tops you could get IF it was in 100% working order and solid engine. JUST MY THOUGHTS and that may be too high to expect with all the used welders on the market today that are newer

  8. #8
    Join Date
    Nov 2010
    Location
    64075
    Posts
    2

    Question Welder's Widow needs info

    Late husband has AEADS-200LE that looks and runs like new. There's also a MIG and a TIG as he was a welder. Need to know value of this very nice 200LE. By the way, my husband died of COPD. He had metal in his lungs. Food for thought since he was only 58. Widowed at 47, sigh. Always were proper gear!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 62

Welding Projects

Special Offers: See the latest Miller deals and promotions.

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 137