that is some very nice work.
Results 31 to 33 of 33
Thread: Head Ache Rack on a Budget
01-05-2010, 11:16 AM #31
01-05-2010, 03:24 PM #32
You are correct, the top is 36* each cut . Sorry bout that !
One more thing, You Know where you can stick your, he,he, he !
The best & most simple way is , what ever your upright angle is just divide it in Half !
72*= 36*, 80*=40, 60*=30*, etc., etc .
Last edited by nfinch86; 01-05-2010 at 03:55 PM.
Sunrise Outside My Shop In Delhi, Ontario
- Weldcraft WP26FV Tig Torch setup.
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Miller Econo Twin AC/DC High Freq.
- Lincoln Power Mig 180C
- Horizontal Steel Band Saw
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.
01-08-2010, 06:52 PM #33Senior Member
- Join Date
- Feb 2007
- West Farmington, OH
That's an awesome headache rack. You never could have bought one nearly as nice as that one. It's top notch in my book!Blondie (Owner C & S Automotive)
Colt the original point & click interface!
Millermatic 35 with spot panel
Victor O/A torches
Too many other tools to list
03 Ram 1500
82 GL1100 Interstate