8"x8"x7' I Beam For Sale Or Trade
Let Me Know What You Have To Trade
Or What You Want To Pay
Brand New Beam
RIDGEFIELD PARK NEW JERSEY
Results 1 to 10 of 12
-
10-27-2007, 07:41 PM #1
Junior Member
- Join Date
- Apr 2007
- Posts
- 8
8"x8"x7' I Beam For Sale Or Trade
Last edited by MYBOYDAVE; 10-27-2007 at 08:08 PM.
-
10-27-2007, 08:04 PM #2
Senior Member
- Join Date
- Sep 2005
- Location
- Vernon Ct
- Posts
- 117
-
08-11-2009, 03:04 PM #3
Junior Member
- Join Date
- Aug 2009
- Posts
- 2
8"x8"x7' I Beam For Sale Or Trade
I take it this is "W" or wide flange beam, do you know what the lbs/ft is? If not can I can get the thickness of the flange and the web?
Thanks
-
08-11-2009, 03:07 PM #4
Junior Member
- Join Date
- Aug 2009
- Posts
- 2
8"x8"x7' I Beam For Sale Or Trade
I also see you up near NYC do you have a good way to ship to S. Jersey?
-
08-11-2009, 06:37 PM #5
Senior Member
- Join Date
- Jul 2008
- Location
- East Tennessee
- Posts
- 609
If you had to buy it you wouldn't consider it garbage. Fwiw I bought a 12' 8" 24 lb. per ft beam and it was $135 . A new 20ft 8" 24 lb per ft was $270.
Originally Posted by reggie
7 FT WHATS IT ANY GOOD FOR..GARBAGE,GIVE IT AWAY...
Dynasty 200DX "Blue Lightning"
Bernard 3500ss water-cooler
Rockwell vertical mill
Beverly Shear B-3
Beverly Shear JR
Home-made English wheel
Milwaukee Porta-band
" Sawz-all
Tennsmith 36" stomp shear
Fixer upper 1982 Lincoln sa200
-
08-11-2009, 07:42 PM #6
Senior Member
- Join Date
- Mar 2007
- Location
- Deltaville, VA
- Posts
- 2,241
Short lengths of I-Beam such as this are great for making heavy duty horses.
Weld a couple lengths of channel on and use angle iron for the base and you're good to go.
I have a couple that I use all the time for mounting a vice, a tubing roller, a pipe bender, etc. One is the same height as my welding table, which works great for larger pieces.
Not useless, but reallly doesn't have much "commercial" value. I get my beams out of my buddy's scrap dumpster (runs a large fab shop).Syncrowave 250 DX Tigrunner
Dynasty 200 DX
Miller XMT 304 w/714D Feeder & Optima Control
Miller MM 251 w/Q300 & 30A SG
Hobart HH187
Dialarc 250 AC/DC
Hypertherm PM 600 & 1250
Wilton 7"x12" bandsaw
PC Dry Cut Saw, Dewalt Chop Saw
Milwaukee 8" Metal Cut Saw, Milwaukee Portaband.
Thermco and Smith (2) Gas Mixers
More grinders than hands
-
08-11-2009, 07:50 PM #7
Member
- Join Date
- May 2009
- Location
- Massachusetts
- Posts
- 40
I have a piece like that with a vise on one end and a notcher on the other. Also if someone was looking to build a log splitter or a small gantry that would be perfect.
-
08-11-2009, 08:24 PM #8
Senior Member
- Join Date
- Dec 2006
- Location
- Traer, IA
- Posts
- 312
Funny you should say that - just started looking last week for some to build a gantry to pull a cab and pickup box off of a frame. Too bad it's half a country away..... Originally Posted by chrisa7164
-
08-11-2009, 08:26 PM #9
Senior Member
- Join Date
- Feb 2008
- Posts
- 835
Nominal 8" flange width could be 31-67 lbs per ft.
W8x31
W8x35
W8x40
W8x48
W8x58
W8x67
Not very specific, is it?Equipped with red and blue... and red and green!
80% of failures are from 20% of causes
Never compromise your principles today in the name of furthering them in the future.
"All I ever wanted was an honest week's pay for an honest day's work." -Sgt. Bilko
"We are generally better persuaded by reasons we discover ourselves than by those given to us by others." -Pascal
"Since we cannot know all that there is to be known about anything, we ought to know a little about everything." -Pascal
-
08-12-2009, 04:16 PM #10
Senior Member
- Join Date
- Feb 2009
- Location
- Island Falls Maine
- Posts
- 562
I hevent seen a solid price tag yet.
Reply With Quote
