Hy, this whas the last project a finish build and install this week for a client who has purchased a machine 40 feet long and forms cigarette tube. The rails and stands was weld whit my LN-25 mig and the stair whit spoolmatic 30a.
Im too ***y for my XMT
Results 1 to 9 of 9
Thread: Aluminum stair rail mount
-
12-01-2009, 04:16 PM #1
Member
- Join Date
- Nov 2009
- Location
- Montreal, Quebec
- Posts
- 49
Aluminum stair rail mount
XMT 304 cc/cv 208/480 volts
Lincoln wire feeder LN-25 w/Contactor and Gas Solenoid, w/magnum 400 and 200 gun's (12 ft)
Spoolmatic 30a w/Flex Head tube 10'' XRA
Flexible Head Tig Torch w/Gas Valve (25 ft)
Foot Control RFCS-14HD
Side-to-side rotary-motion fingertip Current Control
Miller process Selector Control w/external solenoid valve
Stainless steel welding cart
Makita LC1230 Dry cut saw
www.ricau.ca
-
12-01-2009, 04:28 PM #2
Senior Member
- Join Date
- Sep 2005
- Location
- Salem ,Ohio
- Posts
- 3,647
Very nice...Bob
Bob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
-
12-01-2009, 08:18 PM #3
Senior Member
- Join Date
- May 2009
- Location
- Ontario, Canada
- Posts
- 101
Nice work! How thick are the channels for the stairs? Did you bend them yourself, or have them bent?
Diversion 165
Lincoln SP175T
Ryobi Drill Press
No Name Portable band and chop saws
'97 Triumph Trophy 900 (3 cylinder, hence Triple!)
-
12-01-2009, 08:39 PM #4
Senior Member
- Join Date
- Jan 2009
- Location
- Ohio
- Posts
- 191
Aluminum Stair Rail
Alum. Stairs looks real nice Like the diamond plate Really sets it off. Well great job again
Vernon
-
12-02-2009, 02:50 PM #5
Member
- Join Date
- Nov 2009
- Location
- Montreal, Quebec
- Posts
- 49
Tank's TripleTrophy,
Originally Posted by TripleTrophy
I used a designer and lazer cutting, and folding for the amounts and stairs. The material was 3/16'' thick whit a tubing 1''x1''x 1/8 thick weld under the front stair.
ciao
RicauXMT 304 cc/cv 208/480 volts
Lincoln wire feeder LN-25 w/Contactor and Gas Solenoid, w/magnum 400 and 200 gun's (12 ft)
Spoolmatic 30a w/Flex Head tube 10'' XRA
Flexible Head Tig Torch w/Gas Valve (25 ft)
Foot Control RFCS-14HD
Side-to-side rotary-motion fingertip Current Control
Miller process Selector Control w/external solenoid valve
Stainless steel welding cart
Makita LC1230 Dry cut saw
www.ricau.ca
-
12-03-2009, 07:40 PM #6
Senior Member
- Join Date
- Feb 2009
- Location
- Island Falls Maine
- Posts
- 562
I like it. Looks like you got a little time in it. Just one thing how much is that worth.
-
12-04-2009, 02:16 PM #7
Senior Member
- Join Date
- Oct 2009
- Posts
- 254
beautiful work. Also wondering if you don't mind me asking how much would a project like that run?
Miller syncrowave 200 runner with coolmate 4
and wp2025 weldcraft torch
Miller 125c plasma cutter
-
12-06-2009, 02:08 PM #8
Senior Member
- Join Date
- Dec 2009
- Location
- Williams Lake, British Columbia
- Posts
- 718
Very nice.
How was the warping?
Tres tres beau mon garcon.
-
12-06-2009, 02:25 PM #9
Member
- Join Date
- Nov 2009
- Location
- Montreal, Quebec
- Posts
- 49
Tank's Daniel for asking becose yes, there was a risk for warping. But im very concern about it when a weld something and sometime try to play whit it! For this assembling, each step receve one inch of weld at the time after which are blocked, and a was not needed to straighten them after.
SalutXMT 304 cc/cv 208/480 volts
Lincoln wire feeder LN-25 w/Contactor and Gas Solenoid, w/magnum 400 and 200 gun's (12 ft)
Spoolmatic 30a w/Flex Head tube 10'' XRA
Flexible Head Tig Torch w/Gas Valve (25 ft)
Foot Control RFCS-14HD
Side-to-side rotary-motion fingertip Current Control
Miller process Selector Control w/external solenoid valve
Stainless steel welding cart
Makita LC1230 Dry cut saw
www.ricau.ca
Reply With Quote
