Sorry, but I have to ask...
Regarding the Bernard Q-guns commonly sold on Ebay, most of them show .045". Are these guns specific to only use .045? Is this just the largest wire that can be used with the liner/tip assembly? Will, say, .030 or .023 work in this torch with the correct tip?
Heckle if you must...I can take it!
Results 1 to 5 of 5
Thread: Stupid Question Warning!!!
11-27-2009, 02:59 PM #1
Stupid Question Warning!!!:~ATTITUDE MAKES THE DIFFERENCE!!!:
11-27-2009, 03:28 PM #2
That is the Max wire size.
Just match up tips to wireEd Conley
Passport Plus w/Spool Gun
Miller 125c Plasma 120v
SO 2020 Bender
You can call me Bacchus
11-27-2009, 04:04 PM #3Senior Member
- Join Date
- Dec 2007
- National City CA
If you wanted to go bigger you'd need to change the liner and the contact tip. but I run .045 and .035 by just changing the tips out.Miller Syncrowave 200 W/Radiator 1A & water cooled torch
Millermatic 252 on the wish list
Bridgeport Mill W/ 2 axis CNC control
South bend lathe 10LX40
K.O. Lee surface grinder 6X18
Over 20 years as a Machinist Toolmaker
A TWO CAR garage full of tools and a fridge full of beer
Auto shades are for rookies
11-27-2009, 04:11 PM #4
Anything smaller than 035, you'll have to simply change the liner out, a 5 minute swap
11-27-2009, 05:19 PM #5
I figured it would be better to ask, than to spend the money being un-aware of what I was buying.
~Ian:~ATTITUDE MAKES THE DIFFERENCE!!!: