This is my first al/tig project with my new Dynasty 200 DX. Love the machine so far. I had a shop bend everything up and i did the welding and mounting on it. I built for a friend of mine that is getting a little old and was having a hard time lifting his 150# generator up into the back of his truck.
Results 1 to 10 of 10
Thread: AL Generator Box for 5th wheel
-
11-09-2009, 08:21 PM #1
Junior Member
- Join Date
- Nov 2009
- Posts
- 4
AL Generator Box for 5th wheel
2008 Dodge 1Ton
2007 Lincoln Pipeliner
200 Kubota diesel
Lincoln Powermig 200
Miller Dynasty 200dx
-
11-10-2009, 03:50 AM #2
Junior Member
- Join Date
- Dec 2008
- Location
- Sunny Florida
- Posts
- 28
Nice job. I like the slideout.
-
11-10-2009, 05:04 AM #3
Senior Member
- Join Date
- Feb 2009
- Location
- Island Falls Maine
- Posts
- 562
that looks realy good
-
11-11-2009, 08:03 PM #4
Senior Member
- Join Date
- Jan 2009
- Location
- Ohio
- Posts
- 191
Generator Box
Nice job Love seeing good work-manship. Good old hard work is the best reward. Great job again. Vernon
-
11-11-2009, 08:25 PM #5
Senior Member
- Join Date
- Dec 2007
- Location
- Los Angeles
- Posts
- 2,636
How did you attach to the 5th wheel Frame?
Did you replace the Bumper?
Looks sweet.Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
11-11-2009, 08:43 PM #6
Senior Member
- Join Date
- Dec 2007
- Location
- southern California
- Posts
- 1,783
Very nice!
Millermatic350P/Python, MillermaticReach/Q300
Millermatic175
MillermaticPassport/Q300
HTP MIG200
PowCon 300SM, MK Cobramatic
ThermalArc 185ACDC, Dynaflux Tig'r, CK-20
DialarcHF, Radiator-1
Hypertherm PowerMax 380
Purox oxy/ace
Jackson EQC
-F350 CrewCab 4x4
-LoadNGo utility bed
-Bobcat 250NT
-PassportPlus/Q300
-XMT304/Optima/Spoolmatic15A
-Suitcase8RC/Q400
-Suitcase12RC/Q300
-Smith oxy/propane
-Jackson EQC
-
11-11-2009, 09:35 PM #7
Junior Member
- Join Date
- Nov 2009
- Posts
- 4
Tough to tell from my pics but i had to strip off some of the belly insulation to expose the frame.Then i welded a 3/8"x4"x14" flat bar to the underside of the frame on both sides,then 2"x2"x1/4" square tubeing accross between the flat bars.Then came down with more flat bar off the original bumper to take any flex out of the tubeing. She's solid.
Originally Posted by Broccoli1
2008 Dodge 1Ton
2007 Lincoln Pipeliner
200 Kubota diesel
Lincoln Powermig 200
Miller Dynasty 200dx
-
11-12-2009, 04:34 PM #8
Senior Member
- Join Date
- Dec 2008
- Location
- Arizona
- Posts
- 801
Nicely done, 2 thumbs up!
Miller Syncrowave 200
Homemade Water Cooler
130XP MIG
Spectrum 375
60 year old Logan Lathe
Select Machine and Tool Mill
More stuff than I can keep track of..
-
11-15-2009, 04:01 PM #9
Senior Member
- Join Date
- Jul 2008
- Location
- Delhi, Ontario:
- Posts
- 1,950
Great Job !!!
Hi; You should be very proud of the job & yourself for the Good Deed !!
That's a Professonal Job, Big Time !!
........... Norm :
Sunrise Outside My Shop In Delhi, Ontario
- Weldcraft WP26FV Tig Torch setup.
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Miller Econo Twin AC/DC High Freq.
- Lincoln Power Mig 180C
- Spoolgun.
- Horizontal Steel Band Saw
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.
www.normsmobilewelding.blogspot.com
-
11-15-2009, 10:27 PM #10
Junior Member
- Join Date
- Nov 2009
- Posts
- 4
Thanks for the compliments guys.
2008 Dodge 1Ton
2007 Lincoln Pipeliner
200 Kubota diesel
Lincoln Powermig 200
Miller Dynasty 200dx
Reply With Quote
