i need info on the switch for the spoolmate 100 for the millermatic 180 autoset. i need part number and where to get the best prices on miller equip. right now i use airgas and National.
Results 1 to 10 of 16
Thread: spoolmate 100 questions
Hybrid View
-
10-20-2009, 08:12 PM #1
Member
- Join Date
- Jan 2009
- Location
- Jennings, LA
- Posts
- 50
spoolmate 100 questions
Garrett R. Durio
Millermatic 180
Dewalt 14" chop saw
B&D 7" grinder
Skill 4 1/2" Grinder
www.myspace.com/garrettdurio
-
10-21-2009, 01:07 AM #2
Member
- Join Date
- Apr 2006
- Location
- Mission Hills, CA
- Posts
- 48
with the spool mate 100 and the 180 auto set should be able to plug it in and burn some alum wire.
78' Miller AEAD-200LE
08' Miller Matic 180 Autoset.
-
10-21-2009, 01:30 AM #3
Member
- Join Date
- Jan 2009
- Location
- Jennings, LA
- Posts
- 50
switch
there is a switch that needs to be installed and i can not find a part number for it need some help.
Garrett R. Durio
Millermatic 180
Dewalt 14" chop saw
B&D 7" grinder
Skill 4 1/2" Grinder
www.myspace.com/garrettdurio
-
10-21-2009, 01:44 AM #4
Senior Member
- Join Date
- Dec 2007
- Location
- southern California
- Posts
- 1,783
Why do you have so many posts on the same question? There are some answers on your other post about the switch in the first section of the forum.
So far as I know, you don't need the switch with the Auto Set version of the 180, only the older, pre-auto-set version.Millermatic350P/Python, MillermaticReach/Q300
Millermatic175
MillermaticPassport/Q300
HTP MIG200
PowCon 300SM, MK Cobramatic
ThermalArc 185ACDC, Dynaflux Tig'r, CK-20
DialarcHF, Radiator-1
Hypertherm PowerMax 380
Purox oxy/ace
Jackson EQC
-F350 CrewCab 4x4
-LoadNGo utility bed
-Bobcat 250NT
-PassportPlus/Q300
-XMT304/Optima/Spoolmatic15A
-Suitcase8RC/Q400
-Suitcase12RC/Q300
-Smith oxy/propane
-Jackson EQC
-
10-21-2009, 07:57 AM #5
Member
- Join Date
- May 2009
- Location
- Massachusetts
- Posts
- 40
I got one with my 211...the package says the switch is required for all 140's and 180's including auto sets...there is no part number on the bag or switch though.The manual says to use retrofit kit #300409.. Hope this helps.
-
10-22-2009, 06:24 AM #6
Senior Member
- Join Date
- Jul 2008
- Location
- Portland, OR
- Posts
- 189
I have an extra because my Spoolmate100, fitted to a MM140 w/Auto Set, was replaced through warranty.
MillerMatic 140 Auto-Set
Reply With Quote
