It was too nice a day to clean the garage,
so instead, I made this fella. except for the ribs
and the, um, hoo-hoo, he's all out of parts of an
old cast-iron stove that I saved from being turned
into Toyotas... The block in the center is about
1" thick, more-or-less solid cast iron -- it was
to heat hot water from the stove. Everything
else is pretty thin section -- probably aout 1/8"
so he's not too sturdy. That's why he's leaning
against a board. (8"wide, btw, for scale)
All welding was AC (that's all I have for stick) Forney
Ni rod from the H/w store. Was about 150a +/-.
The rod was expensive ($20 for 10, I think?)
but it's worth it for CI. My previous experiments
trying to Mig CI with plain steel wire were, um,
not as successful as I'd hoped I guess the experts
really do know what they're talking about :-)
Results 1 to 4 of 4
Thread: It's A Boy? Maybe?
09-26-2009, 07:56 PM #1Senior Member
- Join Date
- Sep 2007
- Medford MA
It's A Boy? Maybe?
09-26-2009, 08:52 PM #2
Cool...BobBob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
Spool Gun conversion. How To Do It. Below.
09-27-2009, 12:58 AM #3Member
- Join Date
- Jun 2008
It's A Boy?
Do not even hesitate!
Watch only 18 +
Last edited by arthur; 09-27-2009 at 01:02 AM.
09-27-2009, 10:58 AM #4
Chopping wood gets him exited eh?
Jeffrey Dahmer tin man maybe?Syncrowave 250DX
XR Control and 30A
Airco MED20 feeder
Thermal Dynamics Cutmaster 81
Smith O/A rig
And more machinery than you can shake a 7018 rod at