i never have done aluminum but, i'm thinking about getting a spool gun for my machine so that i can. first, i have a few questions about spool guns and aluminum.
if i was to get a bernard would it take the same consumables?
does aluminum gunk up the liner like stainless, or is there a liner or just a wire guide?
do i use straight argon?
do i work the puddle or drag or push?
my machine is a miller shopmate 300dx, if i turn the dig all the way down it is set for aluminum, shopmate series are dc machines, i thought you had to have ac for aluminum or is that just with tig?
how thin of metal can you weld with a spool gun?
theese are just some of the questions i have. i haven't tried something new in a while but, i think that you can teach an old dog new tricks.
Results 1 to 2 of 2
Thread: spool gun questions
09-23-2007, 09:43 AM #1Member
- Join Date
- Dec 2006
- collinsville, ok
spool gun questions
09-23-2007, 11:12 AM #2
Here is some good reading for ya...
http://www.millerwelds.com/education...les_search.phpGeorge W. Bush was saving your butt whether you liked it or not!
Fear is temporary, regret is forever
HH210 with SG