I am looking for a new air torch for a Dynasty 200 - I have conflicting info about whether the Weldcraft LS1712R is compatible with the Dynasty 200.
I can't find any specific info on the Weldcraft site so maybe this torch model is discontinued.
Does anyone have any relevant information as to whether this torch will work or not?
Thanks in advance.
Results 71 to 80 of 194
Thread: Dynasty Processes-Set Up
-
11-30-2009, 12:40 PM #71
Junior Member
- Join Date
- Nov 2009
- Posts
- 4
Dynasty 200 torch
-
11-30-2009, 12:52 PM #72
Senior Member
- Join Date
- Jul 2008
- Location
- Houston TX
- Posts
- 240
It should work fine. The LS1712R is a 12ft cable (rubber) and a 17 size torch. Here is a link to a seller....http://www.uswelders.com/product_det...product_id=307
Originally Posted by rdenis
You want a remote cable with the 14 pin connection, not a 5 pin connector.
pgLast edited by piniongear; 11-30-2009 at 01:48 PM.
Dynasty 200 DX_set up on 3 phase
Coolmate 3
MM 251 w/ Spoolmatic 30A
HTP 625 Micro Cut Plasma Cutter
Victor O/A Rig
Bridgeport Mill_3 phase (w/ Acu-Rite 4 axis DRO)
10 inch South Bend Lathe_3 phase
Baldor Double Cup Tool Grinder_3 phase
Baldor 10 inch Buffer
Rockwell 12 inch Disc Sander
Cyclone 2ft X 3ft Bead Blast Cabinet
Quincy 325 2stg- Air Compressor_3 phase
Graymills Built-in Parts Washer
Rockwell/Delta Planer, HD Shaper, Uni-Saw etc.
-
12-02-2009, 09:53 AM #73
Junior Member
- Join Date
- Nov 2009
- Posts
- 4
Thanks PG for the quick reply - awesome website here!
-
12-03-2009, 06:01 PM #74
Junior Member
- Join Date
- Dec 2009
- Posts
- 1
Converting a Dynasty 200 to a plasma cutter.
I'm sure this subject has been approached before, can anyone direct me to the dicussion.
"is it possible to convert my dynasty 200 to a plasma cutter"? I would like to be able to switch back and forth.
thanks...
-
12-03-2009, 06:36 PM #75
Senior Member
- Join Date
- Dec 2007
- Location
- Los Angeles
- Posts
- 2,641
Nope Originally Posted by kaha
Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
12-15-2009, 07:35 PM #76
Senior Member
- Join Date
- Apr 2008
- Posts
- 171
another link or quote
Last edited by BC Iron works; 12-16-2009 at 04:43 PM.
-
12-15-2009, 08:01 PM #77
Senior Member
- Join Date
- Dec 2007
- Location
- Los Angeles
- Posts
- 2,641
Originally Posted by BC Iron works
Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
12-26-2009, 07:11 PM #78
Junior Member
- Join Date
- Dec 2009
- Location
- Groveland, Ma.
- Posts
- 5
Dynasty 300 DX
Hi, I would like some help in getting my Dynasty 300DX set up to weld 1/8" aluminum. I have had this unit new for about 5 years and finally have been able to set it up to use. Any help will be appreciated. Thanks
-
12-27-2009, 09:33 AM #79
Senior Member
- Join Date
- Dec 2007
- Location
- Los Angeles
- Posts
- 2,641
Hey Grizz, Originally Posted by grizzquad
Welcome to Miller.
Here is a Tig handbook you can download.
http://www.millerwelds.com/resources/TIGhandbook/
I think Chapter 6 has starting parameters to get you started with the Basics.Ed Conley
http://www.screamingbroccoli.net/
MM252
MM211
Passport Plus w/Spool Gun
TA185
Miller 125c Plasma 120v
O/A set
SO 2020 Bender
You can call me Bacchus
-
12-27-2009, 10:21 AM #80
Junior Member
- Join Date
- Dec 2009
- Location
- Groveland, Ma.
- Posts
- 5
Dynasty 300 DX
Hi Broccoli,
Thank you very much, I will try that and see what happens. There is a lot of good info here.
Reply With Quote
