Dynasty Processes-Set Up

[ASKANDY]

It has been requested by a few people to have a dedicated INVERTER thread and stick it.
This will be a thread mainly for Dynasty machines with their multi set up features. Diversions, while Inverters, are pretty basic and don't really belong in this group.
This thread is for specific questions regarding set up, menu features, processes or general experiences that feature the Dynasty type machines.

There also have been a lot of requests for a Dynasty book. Even though this is a GREAT idea and has been looked at, our resources at this time are too thin to take on this exhausting task. It's not as easy as jotting down notes on how the Dynasty welds. It has to follow a progression of features and benefits along with weld samples and practical applications examples.
If and when the economy picks back up and we gain some additional weld engineers, an in depth book on Dynasty functions could be possible.

Until then, this thread should help gather some data to help our advanced inverter users and be a collective area where our weld engineers can browse, time willing, and participate.

This is NOT an area for service issues. I'd like to keep this welding related.

Thanks!
Andy

[harold]

A super idea; I for one will be looking forward to seeing it. Many thanks
Harold

[piniongear]

I will watch this thread on a regular basis too.
pg

[mjc79]

Thanks for the good anwers! I have been trying the "soft" square wave, and the following settings

300 amps EN
150 amps EP
80% balance
(the frequency has varied, depending on the joint configuration).

Oh, by the way, I am mostly welding on 1/2" aluminum. (Sometimes it is as thick as 1" though.)

These parameters have been working pretty well. Thanks again!

-mjc

[Miller J. Ryan]

Hey all,

Like Andy said, we have realized a desire for an advanced TIG welding setup guide for our more complex products like the Dynasty, but unfortunatly his comments about available resources is accurate. I did want to start building this thread with member submitted parameters.

Here is a link to another thread which explains ballance, independant amplitude adjustments and frequency for welding thick aluminum (1/2 and up) with a Dynasty 350.

http://www.millerwelds.com/resources...ad.php?t=18362

I hope this helps.

[ASKANDY]

Here's the link to the AC TIG: balance control vs. differential current adjustment thread.


http://www.millerwelds.com/resources...ad.php?t=18449

Andy

[Leefy]

Hey all,

Like Andy said, we have realized a desire for an advanced TIG welding setup guide for our more complex products like the Dynasty, but unfortunatly his comments about available resources is accurate. I did want to start building this thread with member submitted parameters.

Here is a link to another thread which explains ballance, independant amplitude adjustments and frequency for welding thick aluminum (1/2 and up) with a Dynasty 350.

http://www.millerwelds.com/resources...ad.php?t=18362

I hope this helps.

Joe, your post does not connect to a site.

[Miller J. Ryan]

Leefy,

After I posted this yesterday, something the cyber world got messed up. I was working with the site admin. to resolve it. She must have worked it out with Andy, because the link that Andy posted is the one I was trying to link to.

Sorry about the confusion.

Joe

[FATFAB]

I have been searching for "hidden menu" and not found threads for the older Dynasty 200DX (pre blue lightning)?

[dseman]

I have been searching for "hidden menu" and not found threads for the older Dynasty 200DX (pre blue lightning)?

You might want to open this issue in a unique thread as the 'Dynasty Processes-Set Up' thread should just pertain to documenting settings and so forth.

If you go here:
http://millerwelds.com/service/ownersmanuals.php
and enter your serial number, you'll get the correct owner's manual
if you can't find the one that came with the machine when you purchased it.

--dseman