I was at a neighbors the other day and he had a hanger over his welding bottle. He had bought it at a farm show. When I seen it I could hardly waite to get home and make one. His had about six hooks and the one I made only has four. Anyway I thought it was very clever and thought I would pass it on.
Results 1 to 10 of 12
Thread: Hanger for welding bottle
-
03-12-2006, 10:21 AM #1
Senior Member
- Join Date
- Feb 2006
- Location
- North Platte, NE
- Posts
- 101
Hanger for welding bottle
-
03-12-2006, 11:18 AM #2
Senior Member
- Join Date
- Jan 2006
- Location
- long sault ontario canada
- Posts
- 114
Saftey first
Make sure you dont overload it could lead to a messy deal!
smokin ana grinnin for 20 years
Owner MARKS MOBILE WELDING
trailblazer 302
hobart suitcase mig
miller 30a al spool gun
laramy plastic welder
brocco cutter
pipe beveler
all walter hand tools
-
03-12-2006, 11:47 AM #3
Senior Member
- Join Date
- Sep 2005
- Location
- S.W. Pennsylvania
- Posts
- 2,249
Neat idea, I cant help wondering what is holding the bottle upright in the picture.
To all who contribute to this board.
My sincere thanks , Pete.
Pureox OA
Westinghouse 300 amp AC stick
Miller Syncrowave 250
Hexacon 250 watt solder iron
-
03-12-2006, 11:52 AM #4
Senior Member
- Join Date
- Jan 2006
- Location
- long sault ontario canada
- Posts
- 114
thats what i was kinda wondering also if the gas is flamable with the whip and ground kinda close
smokin ana grinnin for 20 years
Owner MARKS MOBILE WELDING
trailblazer 302
hobart suitcase mig
miller 30a al spool gun
laramy plastic welder
brocco cutter
pipe beveler
all walter hand tools
-
03-12-2006, 12:01 PM #5
Senior Member
- Join Date
- Feb 2006
- Location
- North Platte, NE
- Posts
- 101
The bottle is safe in the holder of the Miller 210. Guess I should have took a picture futher away.
-
03-12-2006, 01:31 PM #6
Senior Member
- Join Date
- Sep 2005
- Posts
- 100
Careful you don't strike an arc against that bottle. Seen the pics,it aint pretty!!
-
03-12-2006, 03:51 PM #7
Junior Member
- Join Date
- Feb 2006
- Location
- Hattiesburg, MS
- Posts
- 16
It looks like a bottle of argon or argon/mix, which is an inert gas and isn't flammable, but you still have to watch out not to puncture the bottle because of high pressure. Looks neat though. What did you use to bend the shapes?
Originally Posted by squig
Tom
-
03-12-2006, 04:04 PM #8
Senior Member
- Join Date
- Feb 2006
- Location
- North Platte, NE
- Posts
- 101
Cables are only hung on the hooks after the machine is turned off. The thing was made in a vise and a piece of rail road iron. I welded it together on the floor and on the bench and not on the bottle. Had to hook and unhook the gas to the bottle a couple of times to test the fit. No welding was done on the tank. And again the cables are not hung up until the machine is turned off.
-
03-12-2006, 06:57 PM #9
Senior Member
- Join Date
- Jan 2006
- Location
- long sault ontario canada
- Posts
- 114
Thats a good thang
smokin ana grinnin for 20 years
Owner MARKS MOBILE WELDING
trailblazer 302
hobart suitcase mig
miller 30a al spool gun
laramy plastic welder
brocco cutter
pipe beveler
all walter hand tools
-
03-13-2006, 05:10 PM #10
Member
- Join Date
- Nov 2005
- Posts
- 86
Torch Bottle Hanger
I have a hose and torch hanger on my bottles same principal as tool hanger on this board except I use it for my torch and hose .
Thanks keep the ideas coming
Reply With Quote
