Well finally got to a finished for not point in my welding trailer project.
Here are some pics.
Its a 5x8 trailer. Trailblazer 275, Aircompressor and Oxy/Ace Tanks are raised from deck to allow for some metal storage if needed. Also added a few leveling jacks if ever needed. Has Fold Down Table with Vise, Cable Reels, Air Reel and Oxy Ace Reels for convience and storage space reduction.
Results 1 to 10 of 27
-
07-01-2009, 03:14 AM #1
Senior Member
- Join Date
- Aug 2004
- Posts
- 104
Welding Trailer Project Complete for now
Equipment
Lincoln SA 200, Miller 252 , Miller TrailBlazer 275 and Hypertherm Powermax 600
-
07-01-2009, 03:15 AM #2
Senior Member
- Join Date
- Aug 2004
- Posts
- 104
Last edited by GunLocators; 07-01-2009 at 03:18 AM.
Equipment
Lincoln SA 200, Miller 252 , Miller TrailBlazer 275 and Hypertherm Powermax 600
-
07-01-2009, 06:26 AM #3
Member
- Join Date
- May 2009
- Location
- Massachusetts
- Posts
- 40
very nice..I remember from a previous thread that you were looking to insulate the reels from the deck...looks like you ended up using the piece of cutting board?
-
07-01-2009, 06:36 AM #4
Member
- Join Date
- Nov 2006
- Location
- Benton, Pa
- Posts
- 68
Fire extinguisher mount
I like where you have your fire extinguisher mounted. Would you mind taking me a close up picture of how you mounted it?
-
07-01-2009, 05:43 PM #5
Senior Member
- Join Date
- Apr 2009
- Location
- KANSAS
- Posts
- 511
You don't F around do you. Thats a pretty slick trailer.
'08 F-350
Vantage 400
SA-250
SA-200
Invertec V350Pro
Invertec V205T-AC/DC
Miller 12VS suitcase
Miller spectrum 2050
Pipe beveler's
Track torch
-
07-01-2009, 05:54 PM #6
Senior Member
- Join Date
- Aug 2004
- Posts
- 104
Thanks guys! I will try to get a pic of fire extinguisher mount tommorrow I am at starbucks using thier wifi my wifi crapped out on me and att will not be able to send tech until tommorrow. So I will get some pics and post after they get me fixed for internet....
Equipment
Lincoln SA 200, Miller 252 , Miller TrailBlazer 275 and Hypertherm Powermax 600
-
07-01-2009, 06:04 PM #7
Member
- Join Date
- Aug 2008
- Location
- Vassalboro ME.(summer) & Yuma AZ. (winter)
- Posts
- 38
Welding Trailer project complete for now
Very nice job. I can see that this trailer was well planned out. Thanks for posting the welding project pics. Everybody loves pics. Was wondering did you use Mig or Stick for this project? I am in the middle of a trailer project and I started with stick,and finished with Mig. Are you from the south or the north where this trailer may see some snow?
Lincoln Idealarc 250
Millermatic 211
Spoolmate 100
Arnold
-
07-01-2009, 06:16 PM #8
Senior Member
- Join Date
- Aug 2004
- Posts
- 104
I am in Texas
I used mainly Mig and some stick. I tried to plan it out before starting however I did have a lot of times I changed my mind and changed or redesigned something on the the fly.
Equipment
Lincoln SA 200, Miller 252 , Miller TrailBlazer 275 and Hypertherm Powermax 600
-
07-03-2009, 10:27 AM #9
Senior Member
- Join Date
- Jan 2008
- Location
- haslet, TEXAS
- Posts
- 109
thats one heck of a trailer. im assuming scratch built? how do u like that northern air hose reel?
Miller Digital Elite inferno
Miller MP-10 passive helmet
Hobart Stickmate 250/160 ac/dc
-
07-03-2009, 11:00 AM #10
Junior Member
- Join Date
- Jun 2009
- Location
- So Cal Desert
- Posts
- 25
Nice trailer, I like the setup! I’ve been planning on building one for a while now. It’s been on the back burner with my BBQ smokers, as the honey do’s are taking priority.
Reply With Quote
