My first gate project (very simple)

[Mililani Stick Man]

Some more pictures of my projects the first pic is the sign that I'm going to hang on the gate. I cut it with my plasma cutter from a sheet of 1/8" mild steel. I'll be putting lettering on the sign between the two dogs that welding it to the outside of the gate hopefully I can center it so it looks good.
The other two pics are an old water heater someone was throwing away. So I took it home stripped it and cut the lower side open I will try to weld it back so the round side is on the outside insteed of the inside. First time doing something like this. It seems to be a popular project to make a grill or a smoker.

[urch55]

Some more pictures of my projects the first pic is the sign that I'm going to hang on the gate. I cut it with my plasma cutter from a sheet of 1/8" mild steel. I'll be putting lettering on the sign between the two dogs that welding it to the outside of the gate hopefully I can center it so it looks good.
The other two pics are an old water heater someone was throwing away. So I took it home stripped it and cut the lower side open I will try to weld it back so the round side is on the outside insteed of the inside. First time doing something like this. It seems to be a popular project to make a grill or a smoker.

Stick Man: Looks like that will be a very nice sign.

Next time you can get a water heater try this, the rounded bottom pointed upwards does not really hurt. You can allways add a grate for wood and for Meat Yum Yum..
http://www.millerwelds.com/interests...ct/3385554746/

[jeffsays]

great work.this gate is showing your hard work..keep it up..

[m.k.swelding]

simplbut looks good.