welding table- 4 ft x 4 ft, 3/8 in thick
Results 1 to 5 of 5
Thread: new projects
-
06-14-2009, 09:17 PM #1
Member
- Join Date
- May 2009
- Location
- Brandon,MS
- Posts
- 51
new projects
Matt
Syncrowave 200
Thermal Dynamics Cutmaster 52
Victor O/A
Smithy Midas 1220 Lathe- Mill
Bandsaw- 20 yr old Harbor Freight type
Speedglas
-
06-14-2009, 09:20 PM #2
Senior Member
- Join Date
- Nov 2008
- Location
- Kansas City Metro
- Posts
- 387
Nice looking table. May I ask what size adjusters did you use on the legs?
Miller 211 A.S. and Spoolmate 100
Stickmate LX 235 AC / 160 DC.
Clarke 180 EN Just in case
Spectrum 375 X-Treme.
O/A Medium Radnor Torch, Large Victor Torch.
Milwaukee 14" Chop Saw.
4 x 6 Horizontal Band Saw.
Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
Jackson Passive shade #5 for the plasma.
I almost forgot the Hobart XVP AD Hood.
Projects and Misc Albums
http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )
-
06-14-2009, 09:22 PM #3
Member
- Join Date
- May 2009
- Location
- Brandon,MS
- Posts
- 51
tig torch holder- trying to practice aluminum
Matt
Syncrowave 200
Thermal Dynamics Cutmaster 52
Victor O/A
Smithy Midas 1220 Lathe- Mill
Bandsaw- 20 yr old Harbor Freight type
Speedglas
-
06-14-2009, 09:24 PM #4
Member
- Join Date
- May 2009
- Location
- Brandon,MS
- Posts
- 51
just 3/4 in bolts w/ nut welded on bottom of leg and second nut to lock it in place
Matt
Syncrowave 200
Thermal Dynamics Cutmaster 52
Victor O/A
Smithy Midas 1220 Lathe- Mill
Bandsaw- 20 yr old Harbor Freight type
Speedglas
-
06-21-2009, 11:55 AM #5
Member
- Join Date
- Mar 2008
- Location
- Anthem, Az
- Posts
- 31
Nice design on the TIG torch holder. You might want to weld some angle supports between those legs. Stiffens it up and gives you a great place to store clamps and magnets.
DAVE Dynasty 200DX with Coolmate 3
Millermatic 212 Auto Set
Millermatic 140 Auto Set
Hobart Airforce 400 Plasma Cutter
JD2 Tube Bender
Reply With Quote
