sorry for getting off track. i really just wanted to put a finish to the vice repair, letting all know its repaired.
a card board box full of kitty litter
a $13 pack of Nomacast 1/8"
and all is good to go.
so i add myself to the list who say if you break your vise and have the option, give it a try. after all you got very little to lose and every thing to gain. i really su ck at stick so if i can do it anyone can.
Results 61 to 63 of 63
Thread: broken Vice !! need help!!
07-15-2009, 09:29 AM #61thanks for the help
hope i helped
feel free to shoot me an e-mail direct i have time to chat. firstname.lastname@example.org
summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
07-15-2009, 09:17 PM #62Senior Member
- Join Date
- Jun 2009
- greenfield new hampshire
put the brass to it and be done with it,
12-08-2009, 02:23 PM #63
I would weld it with 7018 and take a chipping hammer between welds tap it all over to releave stress on the cast. I call it ping the metal. Had a lot of good luck with this. If it want weld with 7018 than it not cast steel and the vise is not good material for a vice anyways. Ni rods are not good for stress parts like vices. good luck.