Small project this week, 15 money vaults for our campgrounds here in Jasper.
Dynasty 200DX (older version)
3/32 2% thoriated
6061 plate, tube, and angle
Some of the welds have the dreaded 'welding smut' still not as steady as KB Fabrication or Engloid, but I certainly got better by the end.
Feel free to tear them apart, any coments greatly appreciated.
Results 1 to 4 of 4
Thread: Aluminum Project
05-29-2009, 08:26 PM #1Member
- Join Date
- Jan 2005
- Jasper AB Canada
Aluminum ProjectA Failure To Plan On Your Part,
Is Not An Emergency On My Part!
When you build something Idiot Proof..
Someone builds a better Idiot!
05-29-2009, 08:50 PM #2
Looks like a nice project...BobBob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
Spool Gun conversion. How To Do It. Below.
05-29-2009, 09:35 PM #3
Anyone who could do that or better would not tear that apart.
You are doing some nice work there
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400
05-30-2009, 07:16 AM #4Senior Member
- Join Date
- May 2009
- Ontario, Canada
Nice work. I aspire to work like that, so I'm not going to knock it.Diversion 165
Ryobi Drill Press
No Name Portable band and chop saws
'97 Triumph Trophy 900 (3 cylinder, hence Triple!)