I agree with the new paint alone it doesn't look like the same machine!
Results 21 to 30 of 41
Thread: Custom forklift
05-25-2009, 12:23 AM #21at home:
2012 325 Trailblazer EFI with Excel power
2007 302 Trailblazer with the Robin FOR SALE
2008 Suitcase 12RC
2009 Dynasty 200DX
2000 XMT 304
2008 Thermal Dynamics Cutmaster 52
Retired:Shopmaster 300 with a HF-251
05-25-2009, 12:51 AM #22
Thermal Dynamics Cutmaster 52
Smithy Midas 1220 Lathe- Mill
Bandsaw- 20 yr old Harbor Freight type
05-25-2009, 04:58 PM #23
Wildfire, You are a Craftsman of the Highest Degree !!
Very Impressive Workmanship, Congrats on a Fine Job !!
Sunrise Outside My Shop In Delhi, Ontario
- Arcair- K 4000 CAC.
- LN-25 Wire Feeder
- Lincoln Ranger 8- Engine Drive- CC\CV:
- Lincoln Power Mig 180C
- DeWalt Chop Saw .
- DeWalt Compressor - 13cfm, @ 100 psi.
05-27-2009, 04:21 PM #24
that looks very very very OK. no just kiddin you do good work.
05-27-2009, 05:13 PM #25
wildfire: you have rally outdone the fork lift industry. i like the use of color on the rear steering and axle system. now i can expect to see a new show on TV **** my fork lift.TB 325
suitcase x-treme 12vs
evolution rage 2
05-27-2009, 06:38 PM #26Senior Member
- Join Date
- Oct 2008
Last edited by ligito; 05-27-2009 at 06:46 PM.Millermatic 211 AutoSet w/MVP
Century 110 volt 90/110 MIG-Gone to my son, in Texas
Victor SuperRange OA
Milwaukee Cold Cut Saw
Milwaukee Portable Deep Cut Bandsaw
Milwaukee Hole Hawg
Jet Horizontal/Vertical Bandsaw
Jet MD-18 Mill Drill
Orbit Drill Press
12 Ton Floor Press
2002 E-350 V-10:
1983 F-150 4.9L 6
2004 Honda ST1300
2007 Suzuki LTA400F Quad
1997 Suzuki DR650
05-28-2009, 08:18 AM #27Junior Member
- Join Date
- Jan 2008
heck thats one of a kind forklift wildfire,very nice work indeed
05-31-2009, 03:47 AM #28
You don't know this but that Dalmation is as quiet as an old dog
After I removed the head It looked like there was top end work done in the past. The head was in great shape but it must have run hot because the valve stem seals were brittle and cut. The guides were perfect and the seats were also good. Even after I grind valves I lap them. I feel a valve job is not complete unless there lapped but that's just me and the way I do things. It's worked for me the last 49 years so don't go trying to change me now
The old gal made her first lift this week. 3300 lbs and it was only a joke for her. It don't happen often but if I have to receive a heavy item from a tractor trailer the rig can't get up my 600 foot driveway because of the winding turns. Well that happened this past week so I started the beast ans went down to retreave it. It was funny when the driver said" What kind of lift is that"! He wanted to know about the lift and I wanted my items
Thanks guys for you kind words. It's always nice to hear what others think. Some might say it was crazy to do it and maybe there right. I've done worst than this I think. Cheack my other posts and that will prove it but the way I see it is if your going to do something you may as well make it as enjoyable as you can.Miller matic 350P
Millermatic 252/Spool gun
Miller Spectrum 875 plasma
Miller Dynasty 200 DX
Miller Coolmate 3
Miller Elite ( INFERNO Digital)
2008 Miller Trailblazer 302/Custom trailer
Custom DX200 Crazy Cart
Sofia 13 X 30 Lathe
MODERN 10X50 knee mill with Fagor 40i DRO
Craftex 30 Mill/Drill
All this stuff below was done with Miller gear
My YouTube vids:
05-31-2009, 08:06 AM #29
That is outstanding. It takes alot of patience to take on a big project like that forklift and do a good job.. I have done a fair amout of machinest work. Sometimes welding and machinest work go hand in hand. Congradulation on a real fine job.
Last edited by Maineiac; 05-31-2009 at 09:08 AM.Lincoln Idealarc 250
06-03-2009, 10:44 PM #30Senior Member
- Join Date
- May 2009
- The Colorado Gas Patch
I agree with you anything worth doing is worth doing right! If you don't take the time to do it right the first time you never will.. besides I'd rather do it in the shop and not broke down on the road..
He is my girl doing her morning exercise.. Why weld overhead when you don't have too.. Just flip it over and roll the deck back in the shop on a dolly. (Old trailer house axle-LR of screen)
There's a tad over 4,000 on her (it's the deck for my 42' GN)
Last edited by Pass-N-Gas; 06-03-2009 at 11:30 PM.Steve
A Bunch of tools
And a forklift to move the heavy stuff with..
Looking at CNC Plasmas
It's Miller Time - Get Back To Work!