Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 10 of 15

Hybrid View

  1. #1
    Join Date
    Apr 2009
    Location
    Augusta, GA
    Posts
    274

    Default Thing made with 1/4" base plate and 2pcs of 2.5" tubing.

    I made this to set on my table to keep my 18" tig filler rods in after i cut them in half from 36".

    It is a 1/4" base plate, with (2) 2.5" tubing side by side.

    Base plate is 6.5" x 4".

    It was tig welded with my Sync 200. Used 1/16" 309L filler. 3/32" tungsten (1.5% Lanthanated)

    I should of came up with a better design.. looks kinda funny.. hahahaaa







    Last edited by myistar; 05-16-2009 at 12:29 PM.

  2. #2
    Join Date
    Apr 2009
    Location
    Augusta, GA
    Posts
    274

    Default


  3. #3
    Join Date
    Jul 2007
    Location
    Lancaster, Pa
    Posts
    431

    Default

    I don't think it looks funny at all. You did a much better job with the welds than I would have done.
    Ken

    What else is there besides welding and riding. Besides that

    Miller Thunderbolt XL 300/200 AC/DC
    Hobart Handler 187
    Dewalt Chop Saw
    4" Air Grinder
    Die Grinder
    Rigid Drill Press
    Kellogg 10hp Air Compressor


    2009 FXDC

  4. #4
    Join Date
    Apr 2009
    Location
    Augusta, GA
    Posts
    274

    Default

    awesome.. thanks.. I still want to figure out something else to make so I can TIG it.

  5. #5
    Join Date
    Mar 2007
    Location
    Deltaville, VA
    Posts
    2,239

    Default

    Use a lot of filler, huh?

    2 1/2" pipe will hold "A LOT".

    Nice job, regardless.

  6. #6
    Join Date
    Jul 2007
    Location
    Lancaster, Pa
    Posts
    431

    Default

    Look through the projects board here and I'm sure you'll find quite a few ideas to use.
    Ken

    What else is there besides welding and riding. Besides that

    Miller Thunderbolt XL 300/200 AC/DC
    Hobart Handler 187
    Dewalt Chop Saw
    4" Air Grinder
    Die Grinder
    Rigid Drill Press
    Kellogg 10hp Air Compressor


    2009 FXDC

  7. #7
    Join Date
    Apr 2009
    Location
    Augusta, GA
    Posts
    274

    Default

    Quote Originally Posted by SundownIII View Post
    Use a lot of filler, huh?

    2 1/2" pipe will hold "A LOT".

    Nice job, regardless.
    Yeahh, I should of used a tad bit more, but I am starting to become real real comfortable tigging, haven't been tig welding for too long, just every now and then. The walls of this tubing is .080".

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 62

Welding Projects

Special Offers: See the latest Miller deals and promotions.

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 137