Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums
 
Miller Welding Discussion Forums - Powered by vBulletin

Results 1 to 5 of 5
  1. #1
    Join Date
    Aug 2007
    Posts
    2

    Default Tig for Beginner

    I've been welding for a few years now and have a MM180 mig welder that works great.
    Anyway i'm looking to start on tig and wondering about a good machine.
    I really like the Syncrowave 200's but i have found a used 180 for a pretty good price and wondered what you would think about that.
    I would use it for hobby only and would weld steel as well as aluminum probably no more than 1/4 in.
    I would like to save and buy a syncro 200 but if there isn't much difference and i could get a 180 for cheap than i would.
    Anyway i'm just looking for your thoughts and opinions for a newb?
    Thanks Brent

  2. #2
    Join Date
    Mar 2006
    Location
    Ocean City, Maryland
    Posts
    951

    Default

    I have a synchrowave 180 I bought about 3 yrs ago. Its great with no problems. 1/4" or less is good. The new invertors are the best but pricey, if I had to do it again I'd buy what I have. What kinda price are they asking and how old? that would be my deciding factor.
    good luck
    Last edited by HMW; 08-28-2007 at 11:31 AM. Reason: spelling
    Scott
    HMW [Heavy Metal welding]

  3. #3
    Join Date
    Aug 2007
    Posts
    2

    Default

    He's asking 800. It doesn't say how old but he claims it only has 6 hours of use.

  4. #4

    Default

    The manual for the 180 is online, there is a sequence at power-up that will show the hours useage on the digital display, check it out.

    I gave $1200 for a 180 syncro last fall with less than 10hrs showing on the meter, works great for my stuff.

    Be aware that you will have a sizeable investment in consumables, much more so that a mig. The advantage of a TIG IMO is the ability to have full control of the weld puddle, however in order to take full advantage you'll need a wide range of tungstens, collets, cups and filler sizes. Tig is not nearly as "one size fits all" that MIG is..........

    Tom

  5. #5
    Join Date
    Mar 2006
    Location
    Ocean City, Maryland
    Posts
    951

    Default

    Yeah TDKKARt is right you can tell from the digital meters how many hours are on it. Sounds like a good price. As far as consumables they make a little starter kit that has the 3 most comman sizes in it. 1/16", 3/32" and 1/8". That will do about anything you want. I added .040 to mine and only used it a little. Mostly 3/32" it seems. The tungsten is where it gets you. If I had to pick one size to learn with it would be 3/32"
    Scott
    HMW [Heavy Metal welding]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Non-static method PhpQuickProfiler::getMicroTime() should not be called statically in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/pqp/classes/Console.php on line 77

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 62

Welding Projects

Special Offers: See the latest Miller deals and promotions.

Warning: Function split() is deprecated in /mnt/stor3-wc1-dfw1/357822/357839/www.millerwelds.com/web/content/lib/footer.inc.php on line 137