If that didn't get you off the couch you must be DEAD!!
Results 1 to 10 of 11
Thread: Talladega...What a FINISH!!!
04-26-2009, 05:13 PM #1
Talladega...What a FINISH!!!
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400
04-26-2009, 09:08 PM #2
That was a Super finish for sure. If Cousin Carl didn't move up the track & make an opening I am pretty sure no one was going to get around him. On the positive side two of Roush drivers got their pilot licence this wekend. Fisrt Matt on Saturday & Carl on Sunday. That must be a heck of a ride in the air like that.252 Miller Mig
R - 45 Milling Machine
Kingston 1100 Lathe
Miller 2050 Plasma Cutter
04-26-2009, 09:56 PM #3
I normally don't watch NASCAR, but I heard it going on the radio in my truck. It sounded pretty exciting. I got home, and turned the TV on with about 25 laps to go. The fans sure got a surpise in turn four that final lap! Some of them needed a change of shorts! That was a great race!Dynasty 200 DX runner
Sync 350 LX
XMT 300 w/D74 and roughnecks
ESAB PowerCut 875 plasma
04-26-2009, 10:47 PM #4at home:
2012 325 Trailblazer EFI with Excel power
2007 302 Trailblazer with the Robin FOR SALE
2008 Suitcase 12RC
2009 Dynasty 200DX
2000 XMT 304
2008 Thermal Dynamics Cutmaster 52
Retired:Shopmaster 300 with a HF-251
04-27-2009, 12:57 AM #5
I hope the fans are OK. That fence took a real HIT. Going airborne, backwards at 180 something MPH musta been a rush.
Brad Keselowski won his first cup race by not backing down. Good for him.RETIRED desk jockey.
Hobby weldor with a little training.
Craftsman O/A---Flat, Vert, Ovhd, Horz.
Miller Syncrowave 250.
04-27-2009, 04:14 AM #6
Ugh....can anyone tell me where I can see the rerun of that??!!!!I'm not late...
I'm just on Hawaiian Time