something else i do>
Results 1 to 10 of 14
Thread: narrowed 9" ford
-
04-22-2009, 07:28 PM #1
Senior Member
- Join Date
- Feb 2009
- Posts
- 199
narrowed 9" ford
-
04-22-2009, 07:44 PM #2
Junior Member
- Join Date
- Mar 2009
- Location
- central ohio
- Posts
- 16
Put a 454 and a powerglide in and yer ready for supergasing!
-
04-22-2009, 08:37 PM #3
Senior Member
- Join Date
- Sep 2005
- Location
- Salem ,Ohio
- Posts
- 3,671
Looks Good. That would look good under my old '64 Fairlane. I have an old 9" housing from the 60's just waiting to be narrowed...Bob
Bob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
-
04-22-2009, 08:49 PM #4
Junior Member
- Join Date
- Apr 2009
- Location
- Tucson
- Posts
- 14
reminds me of my 66 mustang =)
Dynasty 200 DX
Millermatic 211
Spectrum 375
Miller Digital Elite
-
04-22-2009, 10:06 PM #5
Senior Member
- Join Date
- Oct 2008
- Location
- taxachussetts
- Posts
- 403
thunder71. i have a question. does the four link need to be straight or can it be in a a little bit of a A shape.(I'm only talking 5 degrees) do i need to explain more? thanks.
TB 302
dynasty 200sd
spoolmatic 30a/wc24
suitcase x-treme 12vs
miller 211
evolution rage 2
-
04-23-2009, 05:24 AM #6
Senior Member
- Join Date
- Feb 2009
- Location
- Island Falls Maine
- Posts
- 562
looks good I have wanted to do that myself but just never have had the ambition.
-
04-23-2009, 06:17 AM #7
Senior Member
- Join Date
- Dec 2007
- Location
- Baldwin, NY
- Posts
- 275
They always have an A shape, lines drawn through the bars must intersect at a forward point, where they do, that is your ic, instant center. That is a very important point for chassis tuning, setting it higher, lower and front to rear completely changes the characteristics of the car.
Originally Posted by vin-man welding
Voigt Precision Welding, Inc.
Miller Dynasty 200 DX, Miller Syncrowave 250, MillerMatic 252, Hypertherm Powermax 45, Auto Arc Trailpower 8000,272+187 lb Peter Wright anvil, 120 lb Fisher-norris, and more! Buffalo drill press, Grizzly Horiz. Bandsaw, Edwards shear, Barth Shear, bantam mechanical ironworker, Hopkins fly press, Doall Bandsaw, brown and sharpe surface grinder.
2007 Silverado 2500HD (tow vehicle)
2000 Camaro SS (Race car)
-
04-23-2009, 06:21 AM #8
Senior Member
- Join Date
- Dec 2007
- Location
- Baldwin, NY
- Posts
- 275
Im currently building a custom narrowed 9", for my SS, I just destroyed my Moser 12 bolt...
My buildup parts,
Strange 9" housing narrowed 4" per side, backbraced
Moser aluminum through bolted center section
Strange 35 spline axles
spool
daytona pinion support
4.57 gears
4130 lightweight bracketry
Strange Drag Brakes
I bought the housing, and I am adapting, narrowing, and making it work with my own custom 4130 thin wall torque arm.
Should be interesting.Voigt Precision Welding, Inc.
Miller Dynasty 200 DX, Miller Syncrowave 250, MillerMatic 252, Hypertherm Powermax 45, Auto Arc Trailpower 8000,272+187 lb Peter Wright anvil, 120 lb Fisher-norris, and more! Buffalo drill press, Grizzly Horiz. Bandsaw, Edwards shear, Barth Shear, bantam mechanical ironworker, Hopkins fly press, Doall Bandsaw, brown and sharpe surface grinder.
2007 Silverado 2500HD (tow vehicle)
2000 Camaro SS (Race car)
-
04-23-2009, 01:24 PM #9
Member
- Join Date
- Sep 2008
- Location
- Blacksburg Va.
- Posts
- 60
9 in
This is the one for my car .
-
04-24-2009, 07:21 PM #10
Senior Member
- Join Date
- Feb 2009
- Posts
- 199
Reply With Quote
