took this old pontoon boat stripped all the floor & hardware & built this gantry for water work.......
Results 1 to 10 of 18
Thread: Pontoon boat project *gantry*
04-22-2009, 07:08 PM #1
Pontoon boat project *gantry*
04-23-2009, 06:32 AM #2
What your plans for the finish project.
04-23-2009, 02:11 PM #3Senior Member
- Join Date
- Sep 2008
- southwestern ohio
it may be a good idea to find out how much the capacity for the origonal oat was so you ca determine the mximum load you can lift without sinking
04-23-2009, 07:27 PM #4
it's being used in the picture see the big flange laying across them boards
04-23-2009, 07:32 PM #5
04-23-2009, 07:33 PM #6
04-23-2009, 07:33 PM #7
04-24-2009, 09:32 PM #8Senior Member
- Join Date
- Mar 2006
It's a good thing that you have a camera, because you sure are stingy with your words.
How about a little more description of what is going to happen with the flange?
Are you going to winch it down to the divers?
Is there a pipe sticking up out of the water a few feet, and you are going to hoist the flange onto it?
It might be obvious to you, but I'm sure I'm not the only one confused.
04-26-2009, 12:01 AM #9I'm not late...
I'm just on Hawaiian Time
04-26-2009, 06:47 AM #10