I have a black area toward the top of my forum page all the way across. This started yesterday I think. It had info etc but that's gone. Anyone else?
Results 1 to 9 of 9
Thread: Blackout
-
04-08-2009, 06:04 AM #1
Senior Member
- Join Date
- Aug 2006
- Location
- Raymore Missouri
- Posts
- 1,907
Blackout
Nick
Miller 252 Mig
Miller Cricket XL
Millermatic 150 Mig
Miller Syncrowave 200 Tig
2-O/A outfits
Jet Lathe and Mill
Jet 7x12 horz/vert band saw
DeWalt Multi Cutter metal saw
Century 50 Amp Plasma Cutter
20 ton electric/hydraulic vertical press
Propane Forge
60" X 60" router/plasma table
www.youtube.com/watch?v=jTu7wicVCmQ
Vist my site: www.nixstuff.com
and check out some of my ironwork and other stuff
-
04-08-2009, 08:33 AM #2
Senior Member
- Join Date
- Feb 2008
- Posts
- 835
Try clearing your browser's cache.
Equipped with red and blue... and red and green!
80% of failures are from 20% of causes
Never compromise your principles today in the name of furthering them in the future.
"All I ever wanted was an honest week's pay for an honest day's work." -Sgt. Bilko
"We are generally better persuaded by reasons we discover ourselves than by those given to us by others." -Pascal
"Since we cannot know all that there is to be known about anything, we ought to know a little about everything." -Pascal
-
04-08-2009, 09:05 AM #3
Member
- Join Date
- Jan 2009
- Posts
- 54
I had the mysterios black area too.
Originally Posted by monte55
-
04-08-2009, 01:47 PM #4
Senior Member
- Join Date
- Jan 2008
- Location
- Colorado
- Posts
- 673
I still have the black band across the top of my window, after deleting temporary internet files.
It says:
List
---------------------------------------
Success)
---------------------------------------RETIRED desk jockey.
Hobby weldor with a little training.
Craftsman O/A---Flat, Vert, Ovhd, Horz.
Miller Syncrowave 250.
-
04-08-2009, 01:54 PM #5
Senior Member
- Join Date
- Aug 2006
- Location
- Raymore Missouri
- Posts
- 1,907
You must think I am that smart.........just enough to be dangerous Originally Posted by Bodybagger
Nick
Miller 252 Mig
Miller Cricket XL
Millermatic 150 Mig
Miller Syncrowave 200 Tig
2-O/A outfits
Jet Lathe and Mill
Jet 7x12 horz/vert band saw
DeWalt Multi Cutter metal saw
Century 50 Amp Plasma Cutter
20 ton electric/hydraulic vertical press
Propane Forge
60" X 60" router/plasma table
www.youtube.com/watch?v=jTu7wicVCmQ
Vist my site: www.nixstuff.com
and check out some of my ironwork and other stuff
-
04-08-2009, 02:32 PM #6
Senior Member
- Join Date
- Mar 2008
- Location
- Battle Ground WA
- Posts
- 179
Craig,
Your black line is really a nice way to show you that you are using two many Smiles
I don't have that because I keep spending money at Millerwelds!!
Not much welding practice this week as I have been working on Motorcycle Gathering event and waiting for my #2 grandson to be born TOMORROW!!!!
Here is #1 Grandson test riding Papas mower after "mig welding a mod" (Jackson watched with excitement through "his own hood"--starting them young!!!!Retired Elevator Consrtructor Local 19 IUEC
AK bush pilot (no longer in AK) too old and no longer bold)
Chaplain CMA chapter 26
Dynasty200dx (new and loving it)
MM-252 (NEW AND LEARNING IT)
Hypertherm PM-45
Miller 140 mig 110v
Vtwin builder
-
04-08-2009, 03:47 PM #7
Senior Member
- Join Date
- Aug 2006
- Location
- Raymore Missouri
- Posts
- 1,907
Blackout is gone
Nick
Miller 252 Mig
Miller Cricket XL
Millermatic 150 Mig
Miller Syncrowave 200 Tig
2-O/A outfits
Jet Lathe and Mill
Jet 7x12 horz/vert band saw
DeWalt Multi Cutter metal saw
Century 50 Amp Plasma Cutter
20 ton electric/hydraulic vertical press
Propane Forge
60" X 60" router/plasma table
www.youtube.com/watch?v=jTu7wicVCmQ
Vist my site: www.nixstuff.com
and check out some of my ironwork and other stuff
-
04-08-2009, 09:55 PM #8
Senior Member
- Join Date
- Jan 2008
- Location
- Colorado
- Posts
- 673
Can't; I get 'clipped' at four. :-( Originally Posted by Ultrachop
Craig,
Your black line is really a nice way to show you that you are using two many Smiles
Got their new catalog today, haven't even looked at it yet. :-( I did pay $16 for a 1/8" zirconiated today. :-( Originally Posted by Ultrachop
I don't have that because I keep spending money at Millerwelds!!
Tim: Originally Posted by Ultrachop
Congrats on the family extension.
What's 'mig'. Originally Posted by Ultrachop
Starting 'em young is good. We're loosing Craftsmen to retirement by the bunches; like you 'n me. Originally Posted by Ultrachop
Mine isn't. Originally Posted by monte55
RETIRED desk jockey.
Hobby weldor with a little training.
Craftsman O/A---Flat, Vert, Ovhd, Horz.
Miller Syncrowave 250.
-
04-09-2009, 05:16 AM #9
Senior Member
- Join Date
- Aug 2006
- Location
- Raymore Missouri
- Posts
- 1,907
Blackout
It was gone and then came back when I used a different computer. This morning it's gone.
Nick
Miller 252 Mig
Miller Cricket XL
Millermatic 150 Mig
Miller Syncrowave 200 Tig
2-O/A outfits
Jet Lathe and Mill
Jet 7x12 horz/vert band saw
DeWalt Multi Cutter metal saw
Century 50 Amp Plasma Cutter
20 ton electric/hydraulic vertical press
Propane Forge
60" X 60" router/plasma table
www.youtube.com/watch?v=jTu7wicVCmQ
Vist my site: www.nixstuff.com
and check out some of my ironwork and other stuff
Reply With Quote
