What type wire, using a mig welder, would work best for Cor-ten A & B steel?
Results 1 to 4 of 4
Thread: Cor-ten steel welding
04-05-2009, 06:57 PM #1Member
- Join Date
- Apr 2009
- Sands Twp, Marquette Co, MI
Cor-ten steel welding
Last edited by smfcpacfp; 06-08-2009 at 12:24 AM.
04-05-2009, 08:29 PM #2
From Lincoln Electric
What consumable should be used for weathering steel?
Core Ten (A242 & A588) steels are weathering steels commonly used for outdoor structures. These steels have a higher resistance to atmospheric corrosion than typical mild steels. Often, welds on these steels are specified for similar corrosion resistance and color match.
On single pass welds, mild steel electrodes are commonly used. There is usually enough pickup from the base metal to obtain a good color match.
On multiple pass welds, low-alloy electrodes are commonly used to obtain a good color match and similar corrosion resistance. The electrodes commonly specified include those with the suffixes -C1, -C2, and -C3.
80% of failures are from 20% of causes
Never compromise your principles today in the name of furthering them in the future.
"All I ever wanted was an honest week's pay for an honest day's work." -Sgt. Bilko
"We are generally better persuaded by reasons we discover ourselves than by those given to us by others." -Pascal
"Since we cannot know all that there is to be known about anything, we ought to know a little about everything." -Pascal
04-06-2009, 01:16 PM #3Junior Member
- Join Date
- Jan 2009
I can't remember all the details... but special wire or rod needs to be used to maintain the corrosion resistance (ER80S-G).
Our (in the Coast Guard) 44 foot motor life boats were built out of Cor-ten steel. One of the contractor doing some repairs didn't use the rod specified in the contract and the boat started springing leaks a few months after the job was finished. Needless to say, the contractor was on the hook for the repairs and the time that the boat was out of service to do the repairs.
04-06-2009, 11:21 PM #4
I use this,........ made to match the A588 weathering resistance.http://www.mylincolnelectric.com/Cat...t.aspx?p=12789Warning to young ladies:
If you wear loose clothes, beware of the machinery. If you wear tight clothes, beware of the machinist.