Help me (if you are willing!)! I need to build a gimballed stove for a racing sailboat. Most of the boats use quarter inch or so stainless steel rod to basically build a rack to hold a camping stove. I need to make about 12 consistant bends in this quarter inch rod and weld it up. Who makes the best bender for this type of material? If I had more time, I would build the bender. The budget allows for tool purchase, and time constraints further that allowance! Thanks in advance!
Dynasty 200 DX
Millermatic 130 XP
Results 1 to 6 of 6
Thread: Stainless rod bends
03-20-2009, 10:24 PM #1
Stainless rod bends:~ATTITUDE MAKES THE DIFFERENCE!!!:
03-20-2009, 11:47 PM #2Senior Member
- Join Date
- Mar 2007
- Deltaville, VA
For those simple bends, an $89 bender from Northern Tool will do the job and do it well.
Multitude of better, quality benders out there if you wish to spend more. JD comes to mind. Pro-Tools makes a good bender.
03-21-2009, 03:31 AM #3Senior Member
- Join Date
- Feb 2008
Use a torch
If your going to be making some small radius 90 degree bends, round and flat stock. I'd use a oxy acetylene. Heat to red orange make your bend let air cool. The blackness will polish out with a flap disc or what ever. I've had great success with this method. I hope it's a diesel stove, propane's no good for boat heat up in that cold ass country. I like it much better down here were we barbecue on deck in the winter. I supose your gettin ready for the king season, hope ya have a good one.
03-21-2009, 07:10 AM #4
Ditto on Sundowns post. Even Harbor Freight has one I believe. I would bend them cold using heat as a last resort esp if there was little or no welding.
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400
03-21-2009, 09:48 AM #5
I too use the el cheapo HF bender 100's of thousands of bends over the last 8 years...BobBob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
Spool Gun conversion. How To Do It. Below.
03-21-2009, 11:59 AM #6
I will go with the Northern Tool bender. Seems perfect for the small, lightweight job at hand.
~Ian:~ATTITUDE MAKES THE DIFFERENCE!!!: