Here are some photos of a drag race manifold builder. I have not gone through the whole thread. But he talks more about the welds further in the thread.
http://www.yellowbullet.com/forum/sh...28&postcount=4
http://www.yellowbullet.com/forum/sh...28#post1282128
Truly works of art
Results 1 to 10 of 14
Hybrid View
-
03-12-2009, 08:04 AM #1
Senior Member
- Join Date
- Jun 2008
- Location
- Mount Clemens,Mi
- Posts
- 350
Is it Art or just good workmanship
glen, If your not on the edge, your wasting space
-
03-12-2009, 08:36 AM #2
Senior Member
- Join Date
- Dec 2007
- Location
- Crete Illinois
- Posts
- 186
I would have to agree on the Work of ART reference. Jim
Welding in Crete
Syncrowave 350 LX
Millermatic 252
Millermatic 180 w Spoolgun
Miller Gold Seal 155
Miller Elite welding helmet
JD2 Tubing bender with Hydraulic conversion
Evolution Raptor15" SteelDry Cut Saw
Hypertherm Powermax 30
Some really cool hammers BIG and small
-
03-12-2009, 08:41 AM #3
Senior Member
- Join Date
- Sep 2007
- Location
- Medford MA
- Posts
- 525
I always thought that good worksmanship is art...
Frank
-
03-12-2009, 10:11 AM #4
Senior Member
- Join Date
- Oct 2007
- Location
- Mt. Clemens, Michigan
- Posts
- 276
That guy's work is off the charts. I've seen it posted on quite a few sites. Every site except one was very impressed, that one being a local import forum...."lots of guys can weld like that, it's not that hard with practice." A couple members on there were not impressed with it, and insinuated that if I was, I must not be much a welder. So I asked them for some examples of their or their friend's work, because if a "lot" of people can weld like that, there should be plenty of pics available from guys they know.
Wouldn't ya know it, nobody came up with anything
-
03-12-2009, 11:41 AM #5
Senior Member
- Join Date
- Mar 2008
- Location
- Battle Ground WA
- Posts
- 179
Beautiful work!! Especially the consistancy in tight places!
Inspiring to say the least!!
TimRetired Elevator Consrtructor Local 19 IUEC
AK bush pilot (no longer in AK) too old and no longer bold)
Chaplain CMA chapter 26
Dynasty200dx (new and loving it)
MM-252 (NEW AND LEARNING IT)
Hypertherm PM-45
Miller 140 mig 110v
Vtwin builder
-
03-12-2009, 08:10 PM #6
Junior Member
- Join Date
- Mar 2009
- Posts
- 5
That is amazing work!
Millermatic 252
Miller Dynasty 200DX
-
03-12-2009, 08:43 PM #7
Member
- Join Date
- Jan 2009
- Posts
- 54
That should be the centre peice on the dinning room table.
Reply With Quote
