I needed a wrench to adjust and tighten my bolts and didn't want to use a good wrench. While I was at a pawn shop a few days ago I picked up several 3/4 chi-pan sockets for pennys a piece. Now I have a wrench and a place to store it.
The new pics are the last 5 pics in the album.
Thanks for looking.
Results 11 to 14 of 14
03-28-2009, 09:42 PM #11
03-29-2009, 12:46 PM #12Junior Member
- Join Date
- Nov 2008
nice brake, great post. Daye
03-29-2009, 06:07 PM #13
I can't help but notice you have the capability to lay down some really nice welds in a variety of situations...what machine or machines do you have?
Heck why not post them up in your signature and your location as well?
It looks to me as tho you are a valuable poster and I welcome you to the forum
What this thread does for me is make me think about ways I could beef up my POS Grizzly pan and box finger brake.
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
03-29-2009, 09:42 PM #14
Thank You TIGMUSKY and FusionKing.
At this point I am not sure but I believe that my welds are a little bit of skill and a ton of luck. My brake has worked well, so far I have no complaints other then I built it way to heavy. The thing probably weighs in near 40 or 50 lbs. I do need to scribe lines in the lift side to make it easy to square my work before I bend it.
Miller 211 A.S. and Spoolmate 100
Stickmate LX 235 AC / 160 DC.
Clarke 180 EN Just in case
Spectrum 375 X-Treme.
O/A Medium Radnor Torch, Large Victor Torch.
Milwaukee 14" Chop Saw.
4 x 6 Horizontal Band Saw.
Rockworth 80 Gallon 2 Stage 16 SCFM @ 175 PSI , 15 SCFM @ 90 PSI.
Jackson Passive shade #5 for the plasma.
I almost forgot the Hobart XVP AD Hood.
Projects and Misc Albums
http://picasaweb.google.com/keesfriend Feel Free to Have a Look ( Just keep in mind I am an amateur )