My other hobby besides welding is shooting sports. I was looking on some web page and I saw something called a snail trap. I want to replicate it but make it tons smaller. It is designed for indoor shooting ranges. It works kind of like a one way door. It is composed of a square opening that tapers down to a smaller opening blocked by a one way metal or hard rubber flap. When the bullet enters drum, the flap shuts behind it. The bullet spins around the drum and slows down. I want to shrink it down to a 2'x2' entrance. It needs to survive a .22 LR bullet. Any suggestions on material thickness or does anyone have one of these. I will post pics when I find them.
Results 1 to 5 of 5
Thread: Snail "Bullet" Trap
02-11-2009, 11:44 AM #1
Snail "Bullet" TrapMiller Maxstar 150 STL
Miller Millermatic Passport Plus
Thermal Dynamics Dragun Plasma Cutter
Protect your seccond ammendment rights! Join the NRA!
02-11-2009, 02:03 PM #2
There are some pics already in the forum. Search bullet trap at the top. I just used 4" black pipe welded to a 3/8" plate on a 45 degree angle. The red circle has what is left of a .44 mag slug...BobBob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
Spool Gun conversion. How To Do It. Below.
02-11-2009, 07:34 PM #3Junior Member
- Join Date
- Nov 2008
I work part time at an indoor shooting range.
.22lr will clog up a snail trap in short order.
The soft exposed lead and low energy just smear the lead against the steel.
02-11-2009, 07:52 PM #4Senior Member
- Join Date
- Feb 2008
- North of Phila. PA
point45 Welcome to the forum, good to have you with us.
welder_guy if all you are shooting is .22 LR then a standard slant wall trap will work fine. The ones Cabelas and places sell are fairly lightweight steel so they shouldn't be hard to build at all. Some where I have a set of plans for one I got from a buddy of mine. I think he got them thru the NRA bookstore. I'll look but don't hold your breath, its been years since I looked at them. Lord knows where they are if I even still have them.
One thing to remember regardless is to set up some sort of exhaust ventilation if you shoot indoors to remove any airborne lead dust.
02-12-2009, 10:09 AM #5
Snail Bullet Trap
Try this URL and click on "Snail Bullet Trap" about eight items up from the bottom of the left side menu