Looking for some information on a safety bullitin put out on the miller load bank a couple of years ago. I know this a kind of vague post but I have a concern that I may have an antiquated unit. Seems to me there was an issue with the Knife edge switches chaffing thru and energizing the switch. Might be wrong about the content of the bullitin all together but worth looking into.
Mainly used the bank for service of the Syncrowave 350's, 351, and 300's. I have recently upgraded the School to Dynasty 200DX and 300DX units.
Looking to switch to the LBP-350 portable if possible.
Thanks for the feedback in advance.
DC1 Joseph Ander
Advanced Welding Instructor
USCG TC Yorktown VA.
Results 1 to 3 of 3
Thread: Load Bank Info
Hybrid View
-
03-01-2006, 02:18 PM #1
Junior Member
- Join Date
- Mar 2006
- Posts
- 10
Load Bank Info
-
03-01-2006, 04:58 PM #2
Senior Member
- Join Date
- Sep 2005
- Location
- S.W. Pennsylvania
- Posts
- 2,249
I would sugjest contacting Miller directly. At the top of their web site is a button "contact us" . They have been quick to reply when I had a question.
http://www.millerwelds.com/To all who contribute to this board.
My sincere thanks , Pete.
Pureox OA
Westinghouse 300 amp AC stick
Miller Syncrowave 250
Hexacon 250 watt solder iron
-
03-02-2006, 05:35 AM #3
Junior Member
- Join Date
- Mar 2006
- Posts
- 10
Thanks, I contacted Mark Bishop. I'll Post his reply when I get it.
Reply With Quote
