So wut if im 16!!!!

[schwede]

hey some pics from my around the house projects keep in mind im 16 with maybe 60 hours of welding expeirence.i took the barbed wire tractor accesorie from this site its not quite done yet though. I know this is a miller forum but one pic is my hobart welder and matching cart. plus my team roping dumby. and finally my welding table with vise. also keep in mind that I only weld with scrap I find off my grandpas old farm stead he purchased.I use a hobart handler 140 with flux-cored i love that little machine!!!!!!

[schwede]

hopefully everything uploaded well

[MTBob]

Schwede:
Welcome to the forum. I'm also relatively new to this forum and have found it really valuable. The folks here are great people and have a huge amount of experience. To be honest, compared to the bunch of Pro's on this forum, I know nothing - but, I've burned a lot of wire and learning with each project.

Good going on trying out various projects, I love that wire rack, I've made a similar one. The ones I've made with a vertical post always ended up with a rat nest when I pulled the wire. So, I made a rig with a horizontal shaft to hold the wire and laid a bar or post or something on the spool of wire to keep it from running away. It helps of the spool has light friction on it.

That Flux Core will serve you well on a farm / ranch application. You won't have to carry gas or deal with wind so much when welding away from the shop. However, be sure to get some gas and try solid wire - the difference is amazing.

[Craig in Denver]

Please limit your internet pic size to 800 x 600. Many of us are still on dial-up.

[Bodybagger]

We love helping out younguns. Just make sure that you do your part...

*Read all the resources there are, such as the Miller "Improving your Skills" section and strive to improve your skills.

*Never weld anything that might compromise safety of life or result in property damage if it fails (ie trailer tongues, vehicle suspensions, overhead lifting equipment, or airplanes) UNTIL you're qualified.

*Practice! Test your welds with the root bend test. See more testing procedures at http://www.arcraftplasma.com/welding...a/physical.htm

*Be honest, humble, safe, and fill your brain up with everything you can because it's not going to be like a sponge for long!

So what if you're 16? We we're 16 too, and some of us even still remember it. And we all agree that it's a MIRACLE we are still alive!

[weldckr]

"So what if your 16" thats about when i got started when i wnated to make a dune buggy out of my VW bug, that was in 1974. I have ben makin a good living at it since. I havent stopped learning. Have fun and keep it up.

[rolfsi]

Looks really good. Keep up the good work.