another welding table

[79rallysport]

Hey Guys,
Im new here. I thought I would post up a welding table that I drew up at work today. Dimensions are about 36"Wx30"Hx34"D. Eventually i'll get a chance to build it. What'd ya think?

[Fishy Jim]

Looks just like mine, only with a different frame.

I wouldn't give mine up for anything after using it for the past year.

[GilaSlim]

I like that design. Good ability for clamping parts for welding.

Fishy Jim, any trouble getting and keeping the top flat and even?

GS

[Fishy Jim]

Channel is inherently not flat across the web, so you're stuck either dealing with the wave, or you need to machine it off (for a small table, that's actually not all that difficult). I chose to deal with it.

Getting the top flat is the job of your frame. Keeping it even is the job of how you connect the channel to the frame. The legs on the channel aren't typically all that even, so you need something to bring them off the frame.

I chose to use little risers that have nuts welded into them. All the slats are removable and thus replaceable. Removable for odd shape work, replaceable for damage and wear. I kept the jig I used to make them so I can have a new slat done in about 15 minutes should I goof and cut through one or drill, or grind or whatever.

My table is flat to within 1/8" across the entire 8' length. Most slats are within 1/16" from one another. Since that's the same tolerance of thick sheet, I'm no worse off than someone who doesn't have their table blanchard ground - but this is a welding table, not a surface plate.

[Fishy Jim]

I finished this in less than a day. Once you get the jig made it's pretty fast work.



Here's what the rail jig looked like before I added the automatic spacing arm (just a piece of bar stock with a hole that you put a pin in to maintain exact distance from one group to the next).


This is an attempt to show you that the "legs" of the channel droop across the web at the edges.


And here's the two rails full of spacers ready for the nuts to be welded.

[79rallysport]

Fishy,
Your table was my inspiration. I thought it was so cool yet very functional when I saw it so I had to try to design my own.