I am working on a project out of 1/4" plate. I had some pieces plasma cut but the design has changed slightly. I need to modify the current pieces. I need to plasma cut about 30" to get the new shape. It is all straight lines. If somebody in the area has a plasma that I could meet up with and get this taken care of, I'd be very indebted. I have used a friends plasma before but this is a tad to thick. I can supply a case of Frosty adult beverages of your choice for this help.
Thanks in advance
Scott
safeprosek@gmail.com
Results 1 to 3 of 3
Thread: DFW area welders
Hybrid View
-
01-10-2009, 10:29 PM #1
Senior Member
- Join Date
- Apr 2008
- Location
- dallas,tx
- Posts
- 204
DFW area welders
-
01-11-2009, 12:03 PM #2
Senior Member
- Join Date
- Oct 2007
- Posts
- 2,949
1/4 Steel Plate
I'm in Phoenix, so I guess that's out of the question.
I cut 1/4" and thicker all the time with my Extreme 375. Just take it a little slower.
Hope you find some one, O/A torch would certainly work!
Dave"Bonne journe'e mes amis"
-
01-11-2009, 03:41 PM #3
Junior Member
- Join Date
- Dec 2008
- Posts
- 4
I'm in Longview Tx but i work night
Reply With Quote
