My wife truck has one of those chrome bumper grille guards on it. It is attached with 5/16 bolts, 8 total. There are 4 on the bottom to the frame, 2 in the radiator support and 2 about half way up the bumper. There are 2 little straps that run between the radiator support and the bumper. They are about 1/2 in wide and maybe am 8th thick. There is just a simple 90* bend at the radiator end. There is no reinforcement at the bend and they keep cracking. I need something a bit more stout to put in there. Im pretty much stuck with the h0les in the support unless I spend days disassembling the front end to make room to drill.
Ill be her hero if I can make the truck quit squeaking every time she hits a bump.
Results 1 to 10 of 40
Thread: Design help needed
01-08-2009, 08:03 AM #1Senior Member
- Join Date
- May 2008
- Belle Plaine Iowa
Design help neededWho do you call when the lawmakers ignore the law?
Miller AC/DC Thunderbolt 225
Miller 180 w/Autoset
Old cutting torch on LPG