This is a duplicate post to the one on Hobart's Weld Talk. See other post for more comments:
Alexander (AlexGo) showed a TIG torch holder on the following posting:
*This is shown below as TIG Torch Holder 1.
*I modified this in my SolidWorks CAD package to come up with my version of this design: TIG Torch Holder 2.
*I decided that I didnít like the filler rods sticking up from the pipe so I eliminated it, and added a place for filler rods on the bottom. This resulted in: TIG Torch Holder 3.
*I built this design which is shown as: TIG Torch Holder 3a.
(Continued on the next Thread)
Results 1 to 10 of 11
Thread: Holder for TIG Torch 1
01-04-2009, 08:36 AM #1Senior Member
- Join Date
- May 2008
- Troy, MI
Holder for TIG Torch 1
Smith Oxyacetylene Torch
Miller Dynasty 200DX
Lincoln SP-250 MIG Welder
Clausing/Coldchester 15" Lathe
16" DuAll Saw
15" Drill Press
7" x 9" Swivel Head Horizontal Band Saw
20 Ton Arbor Press
Miller Spectrum 375 Plasma Torch