Bert, the two pound spools even fit in the drawers.
All accessories don't fit though, I don't have room for c25 and 98/2 along with the argon for the aluminum. I didn't want to make it any bigger than it already was, so I limited it to 2 tanks.
The wire rack also isn't really necessary either, but I figured since I had the space under the second feeder, I might as well clear the space off the shelf.
This is as close to naked as I have.
Results 1 to 10 of 46
Thread: Stacked Welders
12-30-2008, 09:27 AM #10Syncrowave 250DX
XR Control and 30A
Airco MED20 feeder
Thermal Dynamics Cutmaster 81
Smith O/A rig
And more machinery than you can shake a 7018 rod at