stainless steel out door smoker

[chettah1957]

Help Im in school and need a print for a smoker or grill. Im want to make it out of stainless steel. Does any one have any blur prints on how to make one?

[chettah1957]

Does any one have any prints on making a stainless steel smoker? I am in school and we have to make one but I don't have any prints can any one help me? I want one that is upright.

[fendermender]

No prints.
Why not take a beer keg (stainless) and cut it the way you want to,, and create your smoker.
Where I live, the deposit is like 15 bucks.
Or used to be.

[charleskmoore2]

I like that beer keg idea, might try it. I also would get the satifaction of emptying the keg for a purpose this time!

[Leons2003]

I'm not sure what type of pit your wanting or how far your wanting to go. Here is a SS "smoker/grill" my bud built, actually he built 3, one for himself a two for his sons. Do not have any dimensions and since it is located in the country tis not accessable today, but will be going out there in a couple of wks. to hunt and could get some measurements if you like. I started on an old style keg, got as far as cutting in half but had other pressing projects, it would be classed as a pit, which I use for steaks and burgers. If you can find a SS 55 gal. drum, mine is a discarded Dr.Pepper drum, they make super grills.
Or ya could fab up one similar to this tailgater I generated, 10" sch10 SS.
Good luck
L*S

[jweller]

Since a smoker and a grill are 2 very different animals, and you don't really put any specifics on what you want, such as size, it's hard to make suggestions.


check this out
http://www.smokingmeatforums.com/for...splay.php?f=25

there are a lot of homemade smokers there. Should give some good ideas to get started.

[fendermender]

Dang. If I didn't know better, I would almost accuse you of being at a UH tailgate party???

I'm not sure what type of pit your wanting or how far your wanting to go. Here is a SS "smoker/grill" my bud built, actually he built 3, one for himself a two for his sons. Do not have any dimensions and since it is located in the country tis not accessable today, but will be going out there in a couple of wks. to hunt and could get some measurements if you like. I started on an old style keg, got as far as cutting in half but had other pressing projects, it would be classed as a pit, which I use for steaks and burgers. If you can find a SS 55 gal. drum, mine is a discarded Dr.Pepper drum, they make super grills.
Or ya could fab up one similar to this tailgater I generated, 10" sch10 SS.
Good luck
L*S

[chettah1957]

Thanks for all the ideas but we have to do one from start to the end i'm using 48x96 sheet of ss and it is 48x43. Im having a hard time with the insides. I have to TIG weld it