just got a used welder it's a miller econotig. When I stop using the foot control the gas keeps runing on for a few seconds, then it goes off. the stock # 043554 and style is KH26. Is there a problem with the foot control, or is there a quick fix.
Any help would be greatly appreciated.
Results 1 to 3 of 3
Thread: foot control
Hybrid View
-
11-30-2008, 04:41 PM #1
Junior Member
- Join Date
- Aug 2008
- Posts
- 4
foot control
-
11-30-2008, 05:11 PM #2
Junior Member
- Join Date
- Oct 2008
- Location
- Den Haag
- Posts
- 22
The gas is supposed to keep going... It's called postflow... I'm not familliar with your welder, but I suspect that there will be a setting for it buried someplace in the menues...
If you don't postflow your argon, you will contaminate your tungsten with oxygen from the air when it's hot from welding.
Al...
-
11-30-2008, 07:12 PM #3
Junior Member
- Join Date
- Aug 2008
- Posts
- 4
foot control
thank for the help
Reply With Quote
