I am looking for the distance between center to center of the holes in the block , i bought the scroll attachement but i want to do the block myself , they sell the block for 108,00$ at unibender , just imagine a piece of 2x3 and 3 sleeve of 3 inches , i can do that for cheaper i think .
Sorry for the small pictures .
Results 1 to 4 of 4
11-29-2008, 01:39 PM #1
Someone Can Help Me, Need MeasurementFABRICATION-CRÉATION K ZEN
11-29-2008, 04:06 PM #2
I have it but mine is 20 miles from my house...BobBob Wright, Grandson of Tee Nee Boat Trailer Founder
Metal Master Fab Salem, Oh 44460
Birthplace of the Silver & Deming Drill
1999 MM185 w/185 Spoolgun,1986 Thunderbolt AC/DC
Spool Gun conversion. How To Do It. Below.
11-30-2008, 11:01 AM #3
if you have the Scroll attachment why don't you just measure It?Ed Conley
Passport Plus w/Spool Gun
Miller 125c Plasma 120v
SO 2020 Bender
You can call me Bacchus
12-01-2008, 09:16 AM #4Junior Member
- Join Date
- Dec 2006
Do you have access to machinist calipers or ruler? If this measurement is in a straight line, measure the thickness of the wall between the holes and then add the diameter of one of the holes and you will have the distance from center to center. Or am I missing something here?
Last edited by dsgsr; 12-01-2008 at 03:03 PM.