Bought a HF Bead Roller a few months ago, and finally got around to beefing it up.
If you know anything about these, they are just about worthless in the 'stock' form...you have to consider it a bead roller kit.
I used 3/8x2 flat stock, some scrap, and a 2" tube so I could fit it in my receiver.
I did some test panels in 18 ga.
Works fine. Now I need practice.
-James
Results 1 to 5 of 5
Thread: Bead Roller, Modified HF
Hybrid View
-
11-29-2008, 07:59 AM #1
Senior Member
- Join Date
- Mar 2007
- Posts
- 132
Bead Roller, Modified HF
-
11-29-2008, 12:34 PM #2
Senior Member
- Join Date
- Mar 2008
- Location
- Anchorage AK
- Posts
- 344
Next is to add the dc motor and controller?
Nice work
-
11-29-2008, 05:15 PM #3
Senior Member
- Join Date
- Mar 2007
- Posts
- 132
Thanks,
I'd like to motorize it but probably won't. Unless I get a bunch of beadrolling work, which I don't see happening.
-James
-
11-29-2008, 05:29 PM #4
Senior Member
- Join Date
- Aug 2006
- Location
- near rochester NY
- Posts
- 9,881
nice job, looks like it should do a great job now.
thanks for the help
......or..........
hope i helped
feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
JAMES
-
01-05-2009, 05:44 AM #5
Junior Member
- Join Date
- Jan 2009
- Posts
- 2
Looks great...nice and beefy.
Came across this while searching for other stuff.....check it out.
http://www.jalopyjournal.com/forum/s...ghlight=roller
Reply With Quote
