I pie cut the ducts on a Detroit Diesel air cooler to spread them apart an inch and a half. Used a Lincoln Tig 300 with watercooler and 4043 to welded it up. I think 5356 would have been a better choice but the boss wanted it done with what he had....so the unfortunate part I was stuck trying to use 4043 and a balled Thoriated Tungsten.....it didn't come out too pretty. I know thoriated isn't the right tungsten for the job and I can see why now. Dave
Results 1 to 8 of 8
11-20-2008, 04:46 PM #1turbo38t Guest
My first aluminum tig job at work.
11-20-2008, 05:51 PM #2
Don't be too hard on yourself, it doesn't look so bad.
Sometimes the bottom line is that it works good and I'm sure the customer will be happy!at home:
2012 325 Trailblazer EFI with Excel power
2007 302 Trailblazer with the Robin FOR SALE
2008 Suitcase 12RC
2009 Dynasty 200DX
2000 XMT 304
2008 Thermal Dynamics Cutmaster 52
Retired:Shopmaster 300 with a HF-251
11-20-2008, 07:58 PM #3turbo38t Guest
11-20-2008, 10:25 PM #4
Why did you ball it?
I never ball my thoriated when I use it on aluminum, and it's practically the only tungsten I ever use (transformer machine, no less).Syncrowave 250DX
XR Control and 30A
Airco MED20 feeder
Thermal Dynamics Cutmaster 81
Smith O/A rig
And more machinery than you can shake a 7018 rod at
11-21-2008, 03:52 AM #5Senior Member
- Join Date
- Aug 2006
- Melbourne, Australia
As c wagner says "don't be too hard on yourself".
Seeing as the weld looks to be on Aluminium castings then 4043 is the filler I would choose as well, I find it to be a little more "user friendly" for castings.
If that was my 1st go at work I would be very happy with the results and so should you be.
Now just tell your boss you want to do all the tig work that comes in and go for it.
Regards Andrew from Oz.We are tig welders, gravity doesn't worry us.
Miller Dynasty 350 Tig.
OTC AVP300 AC/DC 300 amp hybrid wave Tig. (now retired)
Kemppi MLS 2300 230amp AC/DC Tig for home with all the bells and whistles.
11-21-2008, 04:49 AM #6turbo38t Guest
Thanks. We don't have much tig work at all to do. I balled it cause the one that was there was balled. It didn't seem right to me, but the guy that left was a really good tig guy. The balled thoriated doesn't work so well though LOL. It splinters/cracks at the ball. I thought my school welding teacher told me 5356 is better for cast. I remember welding some 1/16" cast stuff from home depot in school and 4043 wouldn't hardly bond. It worked out good so far on this cooler. Dave
11-21-2008, 07:44 AM #7
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400
11-24-2008, 06:01 PM #8Senior Member
- Join Date
- May 2008
- Troy, MI
Smith Oxyacetylene Torch
Miller Dynasty 200DX
Lincoln SP-250 MIG Welder
Clausing/Coldchester 15" Lathe
16" DuAll Saw
15" Drill Press
7" x 9" Swivel Head Horizontal Band Saw
20 Ton Arbor Press
Miller Spectrum 375 Plasma Torch