That's exactly how I took it. Re-read post #1 and #10
I guess that after I read the first post
"So anyone else nuts over heli-coils ?????"
should have answered with a simple
But I didn't so please forgive me for offending you.
I have no idea.
I make my own inserts for hollow tubing and weld them in.
Turboglen has a lathe, mill and other shop equipment as do I
I also do not understand "and i'll say **** yea!!"
Results 21 to 25 of 25
11-28-2008, 09:23 AM #21
Last edited by LuckyEddie; 11-28-2008 at 09:25 AM.
11-28-2008, 10:32 AM #22
Heck man you ain't offending me at all!!! I just like to stir the pot and helping Turboglen's thread going...it has been a good one to say the least with many good info and links. Sharing ideas and agreeing to dis-agree is what we are all about here.
I am just sorta pointing out that I would have to think a hand drill is a clumsy way to do this and only do it if it makes the dif between racing or setting in the garage ...trust me I understand. It is just too crude for my taste. I used to race Nascar asphalt Grand American late Models and they are an entirely fabricated tube chassis unlike traditional late models that use a frame from a car to begin with. I built my own.
Things get really crazy when it comes down to do we rig it for the weekend or do we scatter it and lay out a week?
I've owned 2 machine shops (automotive) and I used to be a machinist in the Army and much of their training was aimed at doing this very thing out in the field. We had a bunch of crazy mechanics who would break off every bolt for exhaust manifolds on M1-51A1's (jeeps) and then bring them to me. Along with everything else they could screw up.
It went well with my hillbilly junkyard background for sure. When i got out of their I was a firm believer in doing everything to keep from messing threads up.
Now I have my own aluminum repair biz and I STILL see every type of thread screw-up imaginable and get to fix them.
This thread has sorta made me look at this in a different light tho. I'll admit but all of my insert conversions if needed would be done on a professional set-up. it is to hard to do countless counterbores and hold any kind of tolerences both on location and to size as well as depth. Plus keeping the tap straight. Most heli-coils that I get to fix are entirely FUBAR already.
Now despite how I feel myself I will say I would imagine that Turbo-Glenn has gotten WAY WAY better at doing this than the average bear!!
Miller Dynasty 700...OH YEA BABY!!
MM 350P...PULSE SPRAYIN' MONSTER
Miller Dynasty 280 with AC independent expansion card
Miller Dynasty 200 DX "Blue Lightning"
Miller Bobcat 225 NT (what I began my present Biz with!)
Miller 30-A Spoolgun
Miller Spectrum 300
Miller 225 Thunderbolt (my first machine bought new 1980)
Miller Digital Elite Titanium 9400
11-28-2008, 04:30 PM #23
Please let me apologize for being so quick to come back like that and I would like to start over if it is ok with you????
First-- I do like Heli coils and have drilled and taped thousands of them, the ones that I found to be the toughest were 2-56 in titanium cause it was a real pain to drill out the broken taps. We tried to EDM them out one time but found that there was a HAZ with that and they were more difficult to tap so we just drilled them out. Helicoils do have limits and are not a cure all for everything. If the hole is oval or at an angle a mill or drill jig is required to repair.
I have found that Heli coils are a BIG NO NO in salt water. I live on the coast and have taken to working on some of the boats that are down the street at the Marina. Aluminum works great till a fastener is put in it then it is just a matter of time before it falls apart. Even stainless, by itself, is no match for the salt water. I have put rod holders up in the cabin just to have the SS screws fail after less than three years.
Helicoils with stainless fasteners going in to them do not want to come apart without gauling or just welding themselves together.
Every thing has its place and there is a place for helicoils.
Hope the Thanksgiving bunny was good to you
12-14-2008, 05:46 AM #24Senior Member
- Join Date
- Aug 2006
- Orlando, Florida
Thread reapairs are great. I have used them on 3" turbine bolts before. They are a good permanent repair.
Miller Dialarc HF-P 310 Amp Tig
Victor O/A Setup
Lincolin 225Amp Buzzbox
01-08-2010, 07:45 AM #25Junior Member
- Join Date
- Jan 2010
Helicoil Thread Repair System
Helicoil thread repair system a reliable technology
HeliCoil System for Thread Repair & Preventive Maintenance of plastic moulds , machinery , soft metal assembly and all electro-mechanical equipment.
The HeliCoil System is for creation of Stronger & Longer lasting threads while Designing a component or Repairing of component having damaged female threads.
WHY USE HeliCoil
• Create Stronger and longer lasting threads in soft & light metal components made of Aluminium , Composite Alloys or Plastics & Polymers where internal threads of a component are prone to damage due to operating conditions of the equipment the same are fitted in.
• HeliCoil inserts are made from 18-8 grade cold rolled stainless steel having tensile strength ranging from 1,50,000 – 2,00,000 PSI , Hardness between 43-50 HRC which gives a better description of how HeliCoil inserts can withstand a good amount of assembly stress besides creating a stronger thread in weak materials.
• HeliCoil in stainless steel can be safely used in continuous operating temperatures up to 315 degree C & occasional peak temperature of
425 degree C .
• HeliCoil are cold rolled formed & have a very superior surface finish providing maximum surface to surface contact area , thereby greater clamping action and minimum friction between bolt & female thread flank.
• HeliCoil is Anti-Corrosive & Non- Magnetic
Made of 18-8 grade cold rolled stainless steel it provides a better resistance to corrosion under extreme atmospheric conditions and operational environments.
• HeliCoil reduces bolt failure, breaking & thread stripping
The common known causes of bolt failure and breaking or thread stripping are over torque , thread pitch angle errors , progressive pitch errors, high stress conditions & continuous vibrations.
In absence of HeliCoil , it has been observed that a bolt is subject to an average tightening load of more than 70% over the first two threads near to its collar or over a few threads finding a proper surface contact .
The conditions even get worst when normal machined threads are associated with threads having pitch errors and above adverse conditions.
HeliCoil stretches itself to compensate for pitch angle errors & progressive pitch errors thereby providing a better surface contact & more even load distribution to prevent the bolt failures.
HeliCoil has a “designed-in” radial & axial elasticity.
This allows the shearing load to be transformed into favourable hoop stress or radial load towards the full length of the insert. With result the load gets more evenly transformed over the entire length of the threads of a bolt, thus bolt breaking & thread shearing is significantly reduced.
HeliCoil - A Gift to Designers
The above mentioned compensation & even load distribution features allow a superior reliability of assembly and without compromising on performance Allows the Designers to choose a bolts of lower strength , bolt of alternate metals, bolt having lesser length , creating possibility of lower torque requirements for soft metals , retaining strength of components having less wall thickness.
HeliCoil inserts are also available with a locking coil for thread locking of screws & bolts to prevent loosening due to heavy or continuous vibrations.
Unlike the other methods used for thread locking like adhesives , the locking type HeliCoil is reusable for several bolt opening & tightening cycles .
Use of HeliCoil eliminates most of the given problems as it remains in a compressed state inside the threaded hole & holds tightly to the wall despite variable heat expansion , vibrations & high impact conditions. HeliCoil doesn’t get loose by repeated tightening or opening of bolt .
The HeliCoil is installed by a tool which compresses it at first to get installed in a threaded hole after which it sits tightly against the thread flanks , the only way it can be taken out is by using a tool which reduces it in diameter during extraction.
HeliCoil Cuts on outsourcing repairs , reduces equipment down time & avoid expensive conventional methods in practice.
Helicoil is an easy to use good technology & one could do it on own
at a low cost.
E-Mail : email@example.com
Web Site : www.noblefix.com